System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 2 of 12
Tool Pierce - Start Mill Cycle
Z Pierce Feedrate [5 ]
Return Point [Clearance]
Clearance [.1 ]
Final Z Depth [-.375 ]
1st Z Depth [-.375 ]
Z Increment [1 ]
X Pierce Point X[.5 ]
Y Pierce Point Y[1.5 ]
Compensation [Auto Right]
Options [---]
---------------------------------------------------
Event 3 of 12
Y axis Y[ ]
Mill Geometry - Line
Feedrate F[25 ]
Coordinates [Cartesian]
X axis X[1 ]
Y axis Y[3 ]
Z axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
Event 4 of 12
Mill Geometry - Line
Feedrate F[ ]
Coordinates [Cartesian]
X axis X[0 ]
Z axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
400