System information

APPENDIX
Steps to take to avoid ERROR 203
(Heap overflow: Insufficient RAM memory)
If text cycles or canned cycles are being loaded and not being used, turn them off.
See PARMS-SETUP-MISC.
1) (F7) PARMS
2) (F9) CTRL
3) Move cursor to Load Text Cycles
4) Toggle to "No"
5) (ESC)
6) (ESC) to the main menu.
7) Power the machine OFF, then ON, again.
If you are running a large program, try running it through the RS-232 RUN mode.
204 Invalid pointer operation
205 Floating point overflow
206 Floating point underflow
207 Invalid floating point operation
208 TP Overlay Error
209 TP Overlay Error
210 TP Object Error
211 TP Object Error
212 TP Object Error
213 TP Object Error
214 TP Object Error
300 Program already exists
An attempt was made to use a program name already in use. Use a different name.
301 Invalid program number
Valid program numbers are 1 through 9999.
* Simulator program numbers are 1 through 15.
302 No programs to select from
408