System information

APPENDIX
This error may occur anytime a menu is being created for file selection when
there are no files. There may be an unformatted disk in the floppy drive. Parts
memory may be empty.
303 Problem saving program(s) to disk
There is no floppy disk in the disk drive. The floppy disk may not have room to
store additional files. There may be an unformatted disk in the drive.
313 Insufficient storage for compression, unable to post the file
304 Problem loading program(s) from disk
Disk was removed from floppy drive after setting files.
305 Not formatted for conversational. Try text editor.
306 Conversational system has been corrupted
307 Illegal event number
Event number in conversational program is negative.
308 Invalid tool number
Tool number is less than zero or greater than 99.
309 Can't copy or rename a file to itself
Try using a different file name.
310 File not formatted for conversational or parameters
Problem receiving a file via RS-232. Check to see if the proper file was sent.
311 Parameter file not valid
Problem receiving parameter file via RS-232. Check to see if the parameters were
sent.
312 Insufficient parts storage
Parts memory is full. Try erasing some programs from the parts directory
(UTILS-FILES-ERASE).
Program on floppy disk may be too large to fit into the control's memory.
Erase some programs from the parts memory.
314 Insufficient storage, post has been aborted
Erase some programs from the parts memory.
315 Out of storage space on the floppy
Floppy disk is full or has too many programs. There is a limit of 224 files that can
be stored in the root directory on a floppy disk. A sub-directory can be created on
409