System information

APPENDIX
953 Obsolete bit access for ncb controller.
954 Control not detected.
955 Interface not detected.
Byte Parameters
000 Parameter File Version
016 Cartesian Inch Leading Digits
017 Cartesian Inch Trailing Digits
018 Cartesian Metric Leading Digits
019 Cartesian Metric Trailing Digits
020 Angle Inch Leading Digits
021 Angle Inch Trailing Digits
022 Angle Metric Leading Digits
023 Angle Metric Trailing Digits
024 Spindle Inch Leading Digits
025 Spindle Inch Trailing Digits
026 Spindle Metric Leading Digits
027 Spindle Metric Trailing Digits
028 Feed Inch Leading Digits
050 Spindle Range
071 Dry Run Rapid 100%
029 Feed Inch Trailing Digits
030 Feed Metric Leading Digits
031 Feed Metric Trailing Digits
040 RS-232 Change Line-Feed to Carriage Return Linefeed In
041 Send Carriage returns and Linefeeds at the end of each RS-232 block.
042 Key-Board code
045 Machine Version
046 Force Front Panel Spindle
047 Minimum Parts Space
048 use G92 instead of G54 in the Hand-Wheel and Jog screens
049 Extract programs with O##### in RS-232 and Files Load
051 Number of ATC Pockets
053 Resolve Programs in DNC (for GOTOs)
055 Disable 417 Errors
057 Door Open Switch
058 Use Small Soft Keys
059 Load Tool Offsets
064 Initial Units Inch or Metric
065 Number of Axis
068 Spindle Axis
069 Tool Change Type
070 Run Rapid 100%
419