System information

APPENDIX
P369 Job time
P316 Scale
P317 Rotate
P318 Mirror
P370 True tool number
P371- Unassigned
P319 Work system
P399
P320 Primary
P321 Secondary
P400 Work G92 axis 1 (X)
P322 Tertiary
P401 Work G92 axis 2 (Y)
P323 Return plane
P402 Work G92 axis 3 (Z)
P324 Tapping
P325 Custom code
P326 Custom M-code
P434 Work coord. 4 (B)
P436 Work coordinate 5 (X)
P403 Work G92 axis 4 (A)
P404 Work G92 axis 5 (B)
P405 Work G92 optional axis
P327 Custom G-code
P406 Work G52 axis 1 (X)
P328 Feed per Rev (wait for marker)
P407 Work G52 axis 2 (Y)
P329 Feedrate override Lock
P408 Work G52 axis 3 (Z)
P330 Spindle override Lock
P409 Work G52 axis 4 (A)
P410 Work G52 axis 5 (B)
P331- Unassigned
P411 Work G52 optional axis
P334
P412 Work coordinate 1 (X)
P413 Work coordinate 1 (Y)
P335 Hard Tap Fudge Factor
P414 Work coordinate 1 (Z)
P415 Work coordinate 1 (A)
P336- Unassigned
P416 Work coordinate 1 (B)
P343
P417 Work coord. 1 opt. axis
P418 Work coordinate 2 (X)
P344 Inverse Time Feedrate
P419 Work coordinate 2 (Y)
P345 Bore Type
P420 Work coordinate 2 (Z)
P346 G76 Orient Bore Angle
P421 Work coordinate 2 (A)
P347 G76 Orient Bore Distance
P422 Work coordinate 2 (B)
P423 Work coord. 2 opt. axis
P348- Unassigned
P424 Work coordinate 3 (X)
P349
P425 Work coordinate 3 (Y)
P426 Work coordinate 3 (Z)
P350- Used in tool setting software
P427 Work coordinate 3 (A)
P361
P428 Work coordinate 3 (B)
P429 Work coord. 3 opt. axis
P362- Unassigned
P430 Work coord. 4 (X)
P363
P431 Work coord. 4 (Y)
P432 Work coord. 4 (Z)
P364 Draw Bar Delay used in tool
change macros
P433 Work coord. 4 (A)
P365 Feed per Minute Feedrate
P435 Work coord. 4 opt. axis
P366 Feed per Rev Feedrate
P437 Work coordinate 5 (Y)
P367- Unassigned
P438 Work coordinate 5 (Z)
P368
P439 Work coordinate 5 (A)
424