System information

APPENDIX
P1200- Axis 3 Address (Z)
P850 ADC Sample
P851 ADC Scale
P852 ADC Value
P853 ADC Trigger
P854 Tapping Ramp High Gear
P855 Spindle Encoder PPU2
P856- Unassigned
P892
P893 Soft Start Delay
P894 Clamped Feedrate
P895 Cranking Max ipm
P896 Handwheel Encoder PPU
P970 Minimum Linear Rapid AccDec
P972 Quill Epsilon
P974 Quill Scale PPU
P975- Unassigned
P1199
P1004 Positive limit (X)
P1006 Maximum feed (X)
P1008 Rapid velocity (X)
P1010 Home sequence (X)
P1012 Velocity away from home (X)
P1022 Backlash (X)
P1299
P1300- Axis 4 Address (A)
P1399
P1400- Axis 5 Address (B)
P1499
P1000 Axis address label (X)
P1001 Pulses per unit (X)
P1002 Home position (X)
P1003 Home direction (X)
P1005 Negative limit (X)
P897 Cranking Minutes Per Turn
P898 Screen Blank Time
P1007 Dry run feed (X)
P899 Digitizing Enable
P1009 Rapid acc/dec (X)
P900- Unassigned
P962
P1011 Velocity toward home (X)
P963 Max Corner Deviation
P1013 Velocity toward marker (X)
P964 Unassigned
P1014 Encoder multiplier (X)
P965 SpindleScale
(fraction of full spindle dac)
P1015 Slow jog velocity (X)
P1016 Slow jog acc/dec (X)
P966 Minimum Block Time (seconds,
min time when not in fast DNC)
P1017 Rapid jog velocity (X)
P1018 Rapid jog acc/dec (X)
P967 Unassigned
P1019 In position (X)
P968 Minimum Linear Feed AccDec
P1020 G00 unidirectional (X)
P969 Minimum Rotary Feed AccDec
P1021 G60 unidirectional (X)
P971 Minimum Rotary Rapid AccDec
P1023 Excess error (X)
P1024 Rotary=0 Linear=1 (X)
P973 Front Panel Base Port
P1025 English Lead (X)
P1026 English Trail (X)
P1027 Metric Lead (X)
P1028 Metric Trail (X)
P999
P1029 Jog Key Direction (X)
P1000- Axis 1 Address (X)
P1030- Unassigned (X)
P1099
P1040
P1100- Axis 2 Address (Y)
P1041 Home Marker Switch (X)
(Home Switch = 0, Marker = 1)
P1042 G28 reference point (X)
426