System information

APPENDIX
427
P1043 G30 reference point 2 (X)
P1044 G30 reference point 3 (X)
P1045 G30 reference point 4 (X)
P1046 Max Handwheel Error (X)
P1047- Unassigned (X)
P1048
P1049 Feed Back (X)
P1050 Invert Handwheel (X)
(non-zero = invert handwheel
direction)
P1051 Gain Proportional (X)
P1052 Gain Velocty (X)
P1053 Gain Acceleration (X)
P1054 Gain Handwheel (X)
P1055 Feed S-Curve Acc\Dec (X)
P1056 Rapid S-Curve Acc\Dec (X)
P1057- Unassigned (X)
P1099
P1100- Same as above only for (Y) axis
P1199
P1200- Same as above only for (Z) axis
P1299
P1300- Same as above only for (A) axis
P1399
P1503
P1505- Unassigned
P1599 Spindle Orient Delay
P1600- Thermo Degrees per Volt
P1699
P1999
P1400- Same as above only for (B) axis
P1499
P1500 Unassigned
P1501 Software Version
P1502- Unassigned
P1504 Turret Pocket Count
P1554
P1555 Current Pocket
P1556- Tool Slots for swing arm style tool
P1595 changers
P1596- Unassigned
P1598
P1607
P1608- Thermo Inches per Volt
P1615
P1616- Thermo Inverse Growth per
P1623 Degree
P1624- Thermo Position Sensor
P1631
P1632- Thermo Voltage Reference
P1639
P1640- Thermo Position Reference
P1647
P1648- Unassigned
P1700- Security Codes
P1799
P1800- Unassigned
P2000- Tool Radii 0..99
P2099
P2100- Tool Lengths 0..99
P2199