System information

SECTION TWO - FRONT PANEL OPERATION
100% Rapid in Dry-Run: No means the feedrate override will affect rapid moves in the dry
run mode.
Yes means the feedrate override will not affect rapid in the dry run
mode. Rapid moves are 100%.
Spindle on in Dry-Run: No means the spindle will not come on in the dry run mode.
Yes means the spindle will come on in the dry run mode.
Tool Tables by: Radius or Diameter
Don't Load Canned No means Canned Cycles will be loaded.
Cycles: Yes means Canned Cycles will not be loaded; the canned cycles
(drill, pockets, frame etc.) take approximately 39K of RAM.
Block Skip On: If Yes the block skip will be on at power up.
Optional Stop On: If Yes the optional stop will be on at power up.
Safe Zone On: If Yes the safe zone will be on at power up.
G22 turns the safe zone off.
G23 turns the safe zone on.
Foreign Extensions: Refers to the extension for data files. Current valid extensions are
listed below.
CES CZECH
CHN CHINESE
NED DUTCH
DAT ENGLISH
FRN FRENCH
GRM GERMAN
ITA ITALIAN
SPN SPANISH
TRK TURKISH
Tool Changer Information
Machine Type : Type in VMD 30....
ATC Type is: Manual/Avanti, Milltronics, or other
ATC tool (pocket count): Number of pockets on the tool changer
Spindle orient delay(MS): Time delay for orient pin (use 0 for roller pins, or electronic orient)
M6 (Tool Change) Macro: Path and Name of the program used for custom M6
40