System information

SECTION TWO - FRONT PANEL OPERATION

may then recommence. Some parameters can be related to the machine position. To edit or load

these parameters, use F4 (Mach) to load the X, Y, and Z positions into the parameters. Use the

F5 (M-XY) for the X and Y axis or the F6 (M-Z) key for the Z axis. The following is a list of all

the selectable parameters displayed in this mode and a description of their functions.

Axis Address Label ASCII code assigned to each axis

X 88.0000

Y 89.0000

Z 90.0000

Pulses Per Unit The number of pulses the feedback

X 10000.0000 gives per unit of travel

Y 10000.0000

Z 10000.0000

Encoder Multiplier Sets an internal multiplier on the

X 02.0000 number of pulses coming from the

Y 01.0000 encoder. 0 is times 1, 1 is times 2, and 2 is times 4

Z 01.0000

Home Position The dimension assigned to the

X 00.0000 machine zero or home position

Y 00.0000

Z 00.0000

Home Direction Defines the direction of rotation of the motor

X 00.0000 when a home is commanded

Y 00.0000 CW = 00.0000

Z 00.0000 CCW = 01.0000

Velocity Toward Home Sets the feedrate at which an axis

X 60.0000 seeks the home limit switch

Y 60.0000

Z 60.0000

Velocity Away From Home Sets the velocity at which an axis

X 12.0000 feeds off the home limit switch

Y 12.0000

Z 12.0000

Velocity Toward Marker Sets the velocity at which an axis

X 02.0000 searches for the encoder marker pulse

Y 02.0000

Z 02.0000