System information

SECTION TWO - FRONT PANEL OPERATION
Post M codes Table
Post M code #0
Post M code #1
Post M code #2
Post M code #3
Post M code #4 M codes listed here will be executed
Post M code #5 after all other operations within
Post M code #6 the block.
Post M code #7
Post M code #8
Post M code #9
Report File DOS file names to write DPRINT text to when
using POPEN P0
Command Name Any string in this parameter will show up on the F10 (Util)
key. Pressing F10 will execute the DOS file associated with
the command name. See page 112 for more information on
this feature.
PULSEX pulse delay (MS) Msec pulse time used with PULSE0 and PULSE1
Spindle Power Raw Value read from ADC, 0 to 255
Spindle Power Scale Multiplier to obtain Spindle Power Value
Spindle Power Value (AMPS) Calculated from the spindle power raw and scale
Spindle Power Limit (AMPS) Not used
European Code Parameter and Operation Descriptions
Door Open Switch Enables the door open switch
European Code Enables the door open button
Door-Open axis The axis # that the Door-Input-Switch goes into
Door-Open-Input The input # that the Door-Input-Switch goes into
Door-Open-Override Axis The axis # that the Door-Open-Override Button goes into
Door-Open-Override Input The input # that the Door-Open-Override Button goes into
55