Manualshelf

System information

ManualsBrandsMilltronics ManualsConsumer electronicsPL-551
71727374757677787980
SECTION TWO - FRONT PANEL OPERATION
F6 (SpOvr) Main-Parms-Setup-OVRs-SpOvr
The F6 (SpOvr) key brings up the 16 spindle override switch settings. These settings are the
percentages a spindle command will be overridden at each switch position. The spindle override
parameters are changed in the same fashion as the feedrate override parameters. The spindle
override screen is displayed below.
Keys displayed in the Edit Mode:
59