System information

SECTION TWO - FRONT PANEL OPERATION
P232 thru P239 Contains the work coordinate offset relative to the machine
zero of the enabled axis
P232=X P233=Y P234=Z . . . etc
P240 thru P247 Contains the active tool length (H) parameter for the
enabled axis
P240=X P241=Y P242=Z . . . etc
P248 Contains the current arc radius
P249 Contains the current arc I or J or K value
P250 Contains the current arc I or J or K value
P251 Current feedrate in inches per minute or mm per minute
P252 Current dwell time
P253 Current spindle speed
P254 thru P258 Last X, Y, Z, A, B, C values executed
P260 Contains active tool number
P261 Contains active D tool radius
P262 Contains active H tool length
P263 Contains active D offset number
P264 Active H offset number
P266 Contains safe zone and overtravel status (0=off, 1=on)
P267 Contains ratio of feedback pulses to program units (1 is
inch, .03937 for metric)
P268 Pending tool number
P270 thru P274 temp i, temp j, temp k
P273 thru P299 Used as temporary storage
P300 thru 303 Modal 00-Modal 03
66