Instruction manual

7ML19981AK01 XPS/XCT Transducers– INSTRUCTION MANUAL Page 17
Solids Applications - Special
2
1
3
infeed
drag conveyor
typical high level
typical low level
5. Transducer should be mounted perpendicular to slope of wood chips.
1. Transducer should be kept away from infeed.
2. Where agitators are in use, use the Agitator Discrimination parameter
on transceivers where available.
3. Transducer should be aimed away from wall projections.
Storage Bin with Agitator
Dryer - Wood Chips
infeed
agitator