Operating instructions

© Siemens AG 2013
Safety Guidelines: Warning notices must be observed to ensure personal safety as well as
that of others, and to protect the product and the connected equipment. These warning
notices are accompanied by a clarification of the level of caution to be observed.
Qualified Personnel: This device/system may only be set up and operated in conjunction with
this manual. Qualified personnel are only authorized to install and operate this equipment in
accordance with established safety practices and standards.
Unit Repair and Excluded Liability:
 The user is responsible for all changes and repairs made to the device by the user or
the user’s agent.
 All new components are to be provided by Siemens Milltronics Process Instruments.
 Restrict repair to faulty components only.
 Do not reuse faulty components.
Warning: Cardboard shipping package provides limited humidity and moisture protection. This product
can only function properly and safely if it is correctly transported, stored, installed, set up, operated, and
maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area
may cause interference to several frequency based communications.
Note: Always use product in accordance with specifications.
Copyright Siemens AG 2013. All Rights
Reserved
Disclaimer of Liability
This document is available in bound version
and in electronic version. We encourage users
to purchase authorized bound manuals, or to
view electronic versions as designed and
authored by Siemens Milltronics Process
Instruments. Siemens Milltronics Process
Instruments will not be responsible for the
contents of partial or whole reproductions of
either bound or electronic versions.
While we have verified the contents of
this manual for agreement with the
instrumentation described, variations
remain possible. Thus we cannot
guarantee full agreement. The contents
of this manual are regularly reviewed
and corrections are included in
subsequent editions. We welcome all
suggestions for improvement.
Technical data subject to change.
MILLTRONICS
®
is a registered trademark of Siemens Milltronics Process Instruments.
Contact SMPI Technical Publications European Authorized Representative
at the following address:
Technical Publications Siemens AG
Siemens AG Industry Sector
Siemens Milltronics Process Instruments 76181 Karlsruhe
1954 Technology Drive, P.O. Box 4225 Deutschland
Peterborough, Ontario, Canada K9J 7B1
Email: [e-mail]
 For a selection of Siemens Milltronics level measurement manuals, go to:
www.siemens.com/processautomation. Under Process Instrumentation, select Level
Measurement and then go to the manual archive listed under the product family.
 For a selection of Siemens Milltronics weighing manuals, go to:
www.siemens.com/processautomation. Under Weighing Technology, select Continuous
Weighing Systems and then go to the manual archive listed under the product family.