Operating instructions

Page 2 XPS 10/15 F Series Transducer A5E32725813
Specifications
Specifications
XPS 10 F Series Transducers
Measurement Range:
 0.3 – 10m (1 – 33ft)
Frequency:
 43kHz
Beam Angle:
 12°
Environmental
 location:  indoor/outdoor
 altitude:  2000m maximum
 ambient temperature:  -20 to 95°C (-4 to 203°F)
 pollution degree:  4
Construction
 exposure:  Kynar
®1
 colour:  slate gray
 mounting:  1” NPT conduit connection
 options:  factory flange to suit ANSI standard
 submergence shield, where flooding can occur
 split flange for field mounting to suit ANSI
 cable:  2-wire shielded / twisted, 0.5 mm
2
(20 AWG) PVC
jacket
Supply Source
 Transducer shall only be supplied by a Siemens certified controller.
Weight
2
 0.8kg (1.8lb)
Separation
 365m (1200ft) from transducer
Approvals
 FM Class 1 Div 1, Group A, B, C and D
 FM Class 2 Div 1, Group E, F, and G
 see nameplate or consult Siemens for other current approvals
1
Kynar
®
is registered trade mark of ELF Atochem.
2
approximate shipping weight of transducer with standard cable length