1.1) Place dresser upside down on soft surface. Align and fasten dresser using bolt, lock washer and flat washer and tighten with Allen wrench. 1.2) Align and fasten support leg to dresser by turning support leg clockwise until tight.
5 6 7 8 9 1.1 Attach one of the mounting brackets securely to the back edge of the dresser. Use the short screw. 1.2 Determine where the dresser is to be placed and mark location on the wall for the mounting bracket screw hole approximately 2"below the bracket mounted to the edge of the dresser. 1.3 Drill a 3/16" hole in the wall. Press the plastic anchor into the hole and gently tap until the flange on the anchor is against the wall surface. 1.