CAUTION: You must read this before you proceed. Please look in the Seat Panel for hardware packs. RIGHT CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Corner chair, 02 persons may be needed to execute this action.
No. Picture Description Qty A Backrest Panel 1 B Left Arm Panel(With Preinstalled Levellers) 1 C Right Arm Panel(With Pre-installed Levellers) 1 D Seat Panel 1 E Support Bar 1 F Seat Cushion 1 G Back Cushion 1 H Right Back Cushion 1 No.
Before Beginning Assembly: OVERVIEW Back Cushion (G) Backrest Panel (A) Right Back Cushion (H) Seat Cushion (F) Right Arm Panel (C) Left Arm Panel (B) Seat Panel (D) Support Bar (E) FRONT FACING This Right Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Right Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Step 2 Step 2.2 Place the Right Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Step 2.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (C). Then, affix Support Bar (E) with Right Arm Panel (C) by using Bolt (①) and Allen Key (③).. Step 2.2: Attach the Backrest Panel (A) onto Right Arm Panel (C) by using Bolts (①) and Allen Key (③). DO NOT FULLY TIGHTHEN BOLTS. Step 3 Step 3.2 Step 3.
Step 4 A B With the help of your adult partner,place the assembled in Step 3 right side up as shown above. By hand, hold Left Arm Panel (B) and Backrest Panel (A) together tightly then secure the Left Arm Panel (B) and Backrest Panel (A) by using Bolts (①) and Allen Key (③) as shown above. Step 5 Attach the Seat Panel (D) into the Right Chair as shown in picture above. Affix Seat Panel (D) with Corner Chair by using Screws (②) and Allen Key (③).
Step 6 Adjust Pre-installed Levellers height for balance Inspect the Right Chair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints. With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles. Step 7 Turn the Right Chair right side up. Place Seat Cushion (F), Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D). Inspect it and make sure all parts are adequately connected.
Step 8 Note: This is optional step in case we want to connect all chairs in a set together and should be done before placing cushion With assistance from your adult partners, up side down the chairs and using prefixed clip to connect the chairs together 7 of 8
of 8