Installation & Assembly

1 of 2

2 shelf End Table

Step 1

Read through these instructions thoroughly before beginning assembly. We have found this to be of great

value when first assembling this product.

Step 2

2 Shelf End Table

Thank you for purchasing our 2 Shelf End Table. We have found it helpful to have a second

person present in at least one step of the assembly.

Assembly Instructions

Lay out all parts on a "non-abrasive"surface to avoid scratching furniture.

M6*45mm

BOLT

M6*70mm

BOLT

QTY.DRAWING DESCRIPTIONNO.

PAGE 1
2 Shelf End Table Thank you for purchasing our 2 Shelf End Table. We have found it helpful to have a second person present in at least one step of the assembly. Assembly Instructions Lay out all parts on a "non-abrasive"surface to avoid scratching furniture. NO. Step 1 DRAWING DESCRIPTION QTY. D M6*70mm BOLT 4 E M6*45mm BOLT 8 1 F Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product.
PAGE 2
Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface (like the carton or carpet) to prevent damage to the finish. Step 3 Lay Top (A) upside down and attach 2 Side Panels (C) by using 4 6M x 70mm Bolts (D). DO NOT TIGHTEN FIRMLY AT THIS TIME. C C D D A Step 4 Note: It will help to have a second person at this time to assist in assembly. Lay on side and attach 2 Sheves (B) to Side Panels (C) using 8 6M x 45mm Bolts (E).