Installation manual

Preface
PELLERIN MILNOR CORPORATION
• Do not service machine unless qualified and authorized.
• Lock out and tag out power at the main machine disconnect before servicing, or in
accordance with factory service procedures.
• Replace guards and covers before returning the machine to service and do not permit the
machine to be operated with guards or covers removed.
WARNING 5 : Entan
g
le and Crush Hazards
—Contact with moving components normally
isolated by guards, covers, and panels, can entangle and crush your limbs. These components
move automatically.
• Do not service machine unless qualified and authorized.
• Lock out and tag out power at the main machine disconnect before servicing, or in
accordance with factory service procedures.
• Replace guards and covers before returning the machine to service and do not permit the
machine to be operated with guards or covers removed.
CAUTION 6 : Burn Hazards
—Contact with hot goods or machine components can burn you.
• Do not service machine unless qualified and authorized.
• Lock out and tag out power at the main machine disconnect before servicing, or in
accordance with factory service procedures.
• Replace guards and covers before returning the machine to service and do not permit the
machine to be operated with guards or covers removed.
An attendant key is provided with the machine. This key permits an attendant to bypass the coin
acceptor and start a wash program without coins. The key also provides access to the testing and
maintenance functions described in “Testing and Troubleshooting” in the reference manual.
WARNING 7 : Multiple Hazards
—Only knowledgeable service personnel can safely
perform the testing and maintenance functions provided by the attendant key. Unauthorized or
unknowledgeable users can be seriously injured or killed.
• Never leave key in lock.
• Understand the consequences of using the testing and maintenance functions.
ii. 3.
Disposal
The discarded machine must not pose an entrapment hazard. Before disposal, remove the
cylinder door.
ii. 4.
Customer Awareness
A customer safety placard on the machine alerts the customer to immediate hazards from misuse.
The placard is illustrated and described in Section iii. “The Customer Safety Placard—Vital
Information for Coin Laundry Customers, Owners/Managers and Employees”. Keep the safety
placards clean so that the pictures and words are plainly visible. Replace placards
immediately if lost or damaged. See the “Safety Placard Use and Placement” page in the service
manual to identify the placards and properly locate them on the machine.
Use whatever effective means are available, such as monitoring customer activity and posting
signs prominently in the facility, to ensure a safe environment. Customers must understand:
1. the nature of the potential hazards,
2. how to avoid the hazards, and