Operating instructions

PELLERIN MILNOR CORPORATION
Display or Action Explanation
B2T2001014: Cold water connection.
B2T2001015: Reuse (third) water connection.
B2T2001016: Flushing water connection. This is the water that
goes into the supply compartment or pumped chemical manifold
to flush chemicals into the machine.
B2T2003001: Hold the side of the connection stationary with a
wrench as you tighten the connection with another wrench.
Otherwise, you may twist components, such as valves, damaging
them.
B2T2003002: CAUTION: Equipment and Textile Damage
Hazards—Chemicals leaked into the machine, particularly when
it is idle, can destroy machine components and textiles left in the
machine.
Ensure the chemical system prevents dribbling, siphoning, or any
other unintentional release of chemicals.
Inspect regularly for proper operation and evidence of damage.
Consult Milnor document BIWUUI03 “Avoiding Damage from
Allied Remote Chemical Delivery Systems”.
B2T2004027: Steam connection (optional)
B2T2006012: Retain the motor mount spring adjustment sleeve
provided with certain machine models. This sleeve is used to
increase drive belt tension as the belt wears. Instructions are
provided in document BIRQUM01 "Preventive Maintenance" in
the service manual.
18