Installation manual

Chapter 4. Troubleshooting
PELLERIN MILNOR CORPORATION
4.1.1.2. How to Access the Manual Menu
Display or Action Explanation
RUN FORMULA
00 OK TO POWER OFF
The machine must be idle (power on, but not running a formula)
before the Manual menu can be accessed. Also, the
R
un/Program
keyswitch must be at the Run position (
R
).
`
Accesses the Manual menu.
MANUAL MENU
1 SOFTWARE DATE CODE
Reverse type indicates blinking cursor position. Select one of the
Manual menu modes or return to the Run mode, as described
below.
v
/
w
Scrolls forward/backward through the available modes of the
Manual menu.
z
Returns to the Run mode.
RUN FORMULA
00 OK TO POWER OFF
Run mode selected; control is awaiting selection of a valid
formula number. The formula number that was selected when the
Manual menu was accessed appears on the display.
4.1.1.3. How to Return to the Run Mode from the Manual Menu
Display or Action Explanation
`
Enters the Manual menu from Run mode.
MANUAL MENU
1 SOFTWARE DATE CODE
This is the Manual menu display.
z
Exits the Manual menu to the Run mode.
RUN FORMULA
00 OK TO POWER OFF
This is the Run mode display. Select a formula to run, or turn off
machine power.
4.1.2. Determining the Software Version
Display or Action Explanation
`
Accesses the Manual menu.
MANUAL MENU
1 SOFTWARE DATE CODE
Manual menu accessed and Software date code mode selected.
`
+
\
Hold both buttons depressed to view the software date code and
machine configuration information, as shown below.
EP-PLUS/H7J 97005
RESTAURANTS LAUNDRY
Machine style (H7J), software date code (97005) and
configuration (Restaurants Laundry).
RUN FORMULA
xx FORMULA NUMBER xx
Run mode display is restored when the
`
+
\
button
combination is released.