- Pellerin Milnor Corp. Appliance Trim Kit - Appliance Panel Kit User Manual

Published Manual Number/ECN: H000000010/2001064N

• Publishing System: TPAS

• Access date: 2/7/01

• Document ECN's: Exact

Kit Instruction—

KQEXTT1301

PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

PAGE 1
Published Manual Number/ECN: H000000010/2001064N • Publishing System: TPAS • Access date: 2/7/01 • Document ECN's: Exact Kit Instruction— KQEXTT1301 PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.
PAGE 2
Please Read About the Manual Identifying Information on the Cover The front cover displays pertinent identifying information for this manual. Most important, are the published manual number (part number) /ECN (date code). Generally, when a replacement manual is furnished, it will have the same published manual number, but the latest available ECN. This provides the user with the latest information applicable to his machine.
PAGE 3
HQEXTT1301/01064N M7E42 & M9E42 Centrifugal Extractor Inner House Channel = Doubler and Gussets The purpose of this retrofit is to increase the strength of the rear of the inner house of the M7E42 and M9E42 Centrifugal Extractor. Prior to beginning the retrofit, it is necessary to familiarize yourself with all safety precautions in the Centrifugal Extractor’s manual; please observe all safety precautions. It is also imperative that these instructions are read prior to beginning the retrofit.
PAGE 4
HQEXTT1301/01064N After welding is complete, clean and paint all exposed surfaces. If you should have any questions, please call Milnor Technical Support at (504) 467-9591 extension 276.
PAGE 5
3 HQEXTT1301/01064N
PAGE 6
4 HQEXTT1301/01064N
PAGE 7
5 HQEXTT1301/01064N
PAGE 8
6