Installation Guide

TROUBLESHOOTING
Low Batteries (Most Common Issue): To avoid any difficulties during set up, make sure you are
using brand new AA alkaline batteries.
RF Remote Control Programming: Make sure the red light turns on when the buttons on the
remote are pressed. If the red light does not turn on your issue may be battery related. If
batteries are ok and the red light turns on but the remote still does not operate the door lock,
give us a call during business hours to troubleshoot.
Remote Control Range: RF remote control works 10ft - 30ft away without obstructions. If the
range is lower than this, it may be due to interference from an outside source. Give us a call
during business hours to troubleshoot.
INSTEON Programming: If you are having issues operating the lock via INSTEON, please call
INSTEON technical support at 1-866-243-8022
Tools Required (not included):
?
For assistance with assembly or installation,
parts and customer service, call:
1-800-355-0157 (English & Spanish)
9am – 5pm PST Mon. – Fri.
North America
X1 Phillips Screwdriver X4 AA Batteries
Auto-Lock Switch on Part B.:
On the back module (part B), there is a switch labeled “On-Off” which
controls the auto-lock function.
On = Automatic lock after 10 seconds. (shortens battery life up to 50%)
Off = Does not automatically lock.
If you are unable to get your lock to work
please give us a call during business hours.
US Live Tech Support: 1-800-355-0157 M-F 9am - 5pm PST (English & Spanish)
Warranty shipments are always shipped promptly.
MiProducts Corp. La Puente, CA 91746 1-800-355-0157 MADE IN TAIWAN
RF REMOTE CONTROL PROGRAMMING
Press the S button once
Program a Remote
Press and hold either button on the remote you wish to program
2 Beeps = Success
0 Beeps = Go to
Troubleshooting
Within 5 sec.
Press the C button once
To clear all remotes
Press and hold either button on the remote you wish to delete
2 Beeps = Success
0 Beeps = Go to
Troubleshooting
Within 5 sec.
Model WKK
B.
D.
E.
C.
G.
F1.
F2.
F3.
A.
Battery Precautions
• Do not mix old with new batteries.
• Do not use rechargeable batteries.
• Remove batteries from product when
storing for extended periods of time.
• Do not dispose of batteries in fire as
they may explode. Please follow your
local battery disposal procedure.
• Do not puncture batteries. Electrolyte
leakage from the batteries is corrosive
and can cause serious harm to the
eyes or skin. If swallowed, the
electrolyte can be toxic.
• Do not allow conductive materials
such as jewelry or metal tools to make
contact with the batteries which may
cause a short circuit. With a short
circuit, the batteries and conductive
material can become extremely hot
and cause burns.
Register Your Product
• Although we hope you never
have to deal with a warranty
claim during the use of our
product, you should submit a
product registration to validate
the warranty. This keeps it on
record with us so you don’t have
to save a receipt or record of any
kind. Just give us a call and we
will take care of you.
• Register at www.milocks.com
H.
NOTE: This will delete all remotes stored in the memory and will program the remote you are using at that moment.
GENERAL WARNINGS & CAUTIONS:
1. The back module (Part B.) needs to be protected from the weather
2. Remote works up to 30’ without obstructions
WARRANTY
MiProducts Corporation warrants to the original residential user of this product that it will be free from defects in materials and
workmanship, under normal use, for 1 year from the date of purchase. User must provide a copy of original purchase receipt. This
warranty does not cover abuse or misused products or products used in commercial applications. All mechanical components carry a
limited warranty, for a period of 25 years from the date of purchase. The finish of the exterior of this lock carries a limited warranty of
the lifetime of the unit against deterioration due to normal weather conditions. This warranty does not apply to locks that have been
improperly installed, modified, put to a use other than designed, or subjected to acts of God (such as floods, lightning, earthquakes,
etc.) This warranty is limited to repairing or replacing of this lock only at MiProducts Corporation’s sole discretion. MiProducts
Corporation will NOT be liable for the cost of installing, removing, nor reinstalling this product, nor direct, indirect, or consequential
damages to persons or property resulting from the use of this product. This warranty only covers the cost of replacement parts, it does
not cover shipping & handling fees.
To implement this warranty please give us a call during business hours at 1-800-355-0157, or visit www.milocks.com.