User`s manual

MPS Doc: UPS_AS_UM Rev (-) May 23, 2012 Page 38 of 38
When the Application Service is stopped the battery icon in the notification area will
change to "Red X’ed” and a message balloon will inform the user about the
situation.
7.2.5. To restart the Service, locate it in the Services list and click "Start".
(Restarting Windows will automatically start the Service).
7.3. General Notes
7.3.1. When there are no communication problems the Application reads the UPS
status once a second. The overall delay between actual change in the UPS
status and the time it is displayed on the Application interface is about 3 sec.
7.3.2. If the Shutdown Procedure has started and if a specific shutdown operation
cannot be executed (for example the Application cannot shutdown the UPS
due to Read Only user permissions) the Application will keep trying to
perform that action.
7.3.3. Once a Shutdown Procedure has started, it will not be aborted, even if input
power is restored. Regardless, 30 minutes after the triggering of the
Shutdown Procedure (if AC Main power is present and the PC hasn’t shut
down for any reason) the Application will reset and go back to normal
operation.
7.3.4. After Shutdown Procedure has started, the User may force the Application
to go back to normal operation mode by selecting "Goto Normal" from
"Options" menu. If upon selecting the "Goto Normal” the shutdown
conditions are still existing, the Application will immediately retrigger the
Shutdown Procedure. Please note that the command "Goto Normal" resets
the Application to normal mode, but does not affect any process that is
already running external to the Application (like a delayed Windows
shutdown, delayed UPS shutdown, etc).