User's Manual

2-10
CHAPTER 2
SYSTEM INSTALLATION
2.1 GENERAL
This chapter provides the guidelines and instructions for system installation in different
applications.
2.2 INSTALLATION AND GETTING STARTED (QUICK GUIDE)
This section provides summarized instructions for advanced users only. It is recommended
that other users refer to the detailed instructions in Paragraph. Before starting the
installation procedure, inspect all system components and verify that they all appear in
order. Before starting the installation procedure, set your computer to administrator
properties.
2.2.1 Base Station Type Installation
To install a base station type, perform the steps as follows:
a. Install the Radio Manager
TM
application
b. Plug the receiver into the power supply and connect the base station to the unused
communication port on your PC.
c. In Radio Manager window select
Settings>Comm Port... and select the required
communication port from the list.
d. Perform a receiver operation check and verify proper operation on the receiver.
e. While the Radio Manager
TM
is open and waits for incoming calls (orange icon), open
the incoming connections (
Start>Connect To…>Show All Connections>Incoming
Connections
) and select the modem designated for Radio Manager
TM
communication.
f. Install the IrriWise
TM
application.