User's Manual

2-11
g. Reboot (restart) your computer.
h. Define the transmitters in the Radio Manager
TM
System Configuration Table.
i. Click the IrriWise
TM
shortcut on the desktop or alternatively select
Start>Programs>IrriWise .
j. Register IrriWise
TM
.
k. Perform a transmission test for each transmitter - verify proper operation. Verify that
the counter number progresses according to the station type (the number depends on
the number of sensors in the transmitting station), and that the correct time and date
appear at the bottom left corner of the window.
l. In the IrriWise
TM
application select File>Open the Select a Chart screen will open. A list
of all transmitters as specified in the Radio Manager
TM
system configuration table
should appear. Verify that all transmitters appear and are named as specified. If not,
check the system configuration table in the Radio Manager
TM
and perform a
transmission test again.
The application is now installed and ready for operation. Proceed to field installation.