User's Manual

3-13
Ba se St a t i o n
Field Station
1.5 - 2 m
(5 - 6.5 ft)
Up to 4 km (2.5 miles)
LO S
R 232
30 m (98 ft)
S
Figure 3-1. Wireless System Installation
3.2.2 Specifications:
The specifications of the antenna and receiver are as follows:
• Cable length: 30 meters
• Power supply: 10~240 VAC
3.2.3 Installation Procedure
To install the antenna and receiver, perform the steps as follows (see Figure 3-2):
a. Using a flat screwdriver, remove 4 screws and remove the receiver cover.
b. Insert the communication cable into the box and connect the red, black, green and
white wires as specified.
c. Plug the power cable into a 110~240 VAC mains outlet. Verify that the LED is blinking
at a rate of 2 blinks per second.