User's Manual

Speed Tx User Manual
Miltel Communications Ltd. 3
Chapter 1
Introduction
1.1 Purpose and Use
The Speed Tx (FCC ID: SPEEDTx433L1) is a low-power data link transmitter that is
used for data acquisition in Miltel’s water consumption readings collection system.
This device is installed on-site by a professional field technician, thus it includes
technical terms. The equipment is not to be installed by a non-professional individual.
The information in this manual is provided only as instructions for installation and
does not entitle user to make any modifications or adjustments.
1.2 System General Description
The Speed Tx system is a computerized fully automatic radio device. It requires no
human intervention after initial installation. The system enables remote, continuous
and accurate reading of water consumption. The Speed Tx transmits the data
acquired from water meters to a regional concentrator (directly or via a repeater). The
concentrator transfers the data to the central computer for data collection and for
further analysis and reporting.
Note: 1) The system, including transmitters, transceivers and concentrators, is
installed and maintained only by qualified professional technicians.
2) The device is not adjustable by user and is supplied by manufacturer
ready for installation witout provisions for adjustmant.