6M ® Motor Grader Cat® C13 ACERT™ VHP Base Power (1st gear) – Net VHP Range – Net VHP Plus Range – Net 221 kW 221-233 kW 221-248 kW 297 hp 297-312 hp 297-332 hp Gross Vehicle Weight – base Total Front axle Rear axle Moldboard Blade Width 26 060 kg 7112 kg 18 948 kg 57,452 lb 15,679 lb 41,773 lb 4.
16M Motor Grader The 16M delivers multiple technological breakthroughs to give you the best return on your investment. Operator Station Steering and Implement Controls ✔ A technologically advanced cab, featuring ✔ Two joysticks offer precise control joystick controls, provides unmatched and unparalleled ease of operation. comfort and visibility. pg. 4 This advanced technology makes the 16M the most operator-friendly motor grader in the world. pg.
Power Train Engine Hydraulics ✔ An electronically controlled power shift ✔ The Cat® C13 engine combines power ✔ The electro-hydraulic load-sensing system transmission assures smooth shifting management with ACERT™ Technology provides the foundation for advanced and maximum power to the ground.
Operator Station The 16M features a revolutionary cab design that provides unmatched comfort, visibility and ease of use, making the operator more confident and productive.
Advanced Joystick Controls. Two electrohydraulic joysticks reduce hand and wrist movement as much as 78% compared to conventional lever controls for greatly enhanced operator efficiency. The intuitive pattern is easy to learn and provides the precise implement control you expect from Caterpillar. Auxiliary Pod and Ripper Control. The optional ripper control and auxiliary control pod are ergonomically positioned to allow simple, comfortable operation for the multiple hydraulic options. Visibility.
Steering and Implement Controls The 16M sets the new standard for motor grader operational efficiency. Ease of Operation. The revolutionary joystick controls and exceptional visibility make the 16M easier to operate without sacrificing control. The intuitive joystick control pattern allows both new and experienced operators to become productive quickly. Logical grouping of hydraulic functions in the joysticks allow any operator to easily control several functions at the same time.
1 1 1 7 4 6 4 3 6 2 5 2 1 – Ripper Control Pod. Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped), for easy and comfortable control. Left Joystick Functions. The left joystick primarily controls the machine direction and speed. Right Joystick Functions. The right joystick primarily controls the Drawbar, Circle and Moldboard functions.
Structures, Drawbar, Circle, Moldboard Durable structures with fast and simple DCM adjustments deliver precise material control while lowering operating costs. Front Frame Structure. Continuous top and bottom plate construction provides consistency and strength. The flanged box section design removes welds from high stress areas, improving reliability and durability, and increasing resale values for the customer. Rear Frame Structure.
Moldboard. The optimal curvature and large throat clearance help move material quickly and efficiently. Heat-treated moldboard rails, hardened cutting edges and end bits, and large diameter bolts assure reliability and longer service life. The moldboard side shift cylinder is positioned on the left side to eliminate snow wing interference. Moldboard Positioning.
Power Train Integrated, electronically controlled systems, deliver smooth reliable performance with reduced operating costs. Smooth Shifting Transmission. The 16M combines several key innovations to ensure smooth, powerful shifts throughout the gear range. Electronically Controlled Shifting. The full Electronic Clutch Pressure Control (ECPC) system optimizes inching modulation and smooths shifting between all gears and directional changes.
2 Hydraulic Brakes. The oil bathed, multidisc service brakes are hydraulically actuated (1), providing smooth predictable braking and lower operating costs. With brakes located at each tandem wheel, the 16M offers the largest total brake surface area in the industry (2), delivering dependable stopping power and longer brake life. 2 Brake Serviceability and Reliability.
Engine The 16M combines power management with ACERT ™ Technology to deliver maximum power and efficiency while reducing the environmental impact. Power Management. The 16M Power Management System automatically delivers an additional five horsepower in each forward gear 1st through 4th, and each reverse gear 1st through 3rd. This standard feature optimizes rimpull for all gears by balancing traction, speed and horsepower while conserving fuel.
Hydraulics The 16M electro-hydraulics enable advanced machine controls with precise and predictable movements. Balanced Flow. Hydraulic flow is proportioned to ensure all implements operate simultaneously with little effect on the engine or implement speeds. If demand exceeds pump capacity, all cylinder velocities are reduced by the same ratio. The result is improved productivity in all applications. Consistent and Predictable Movement.
Integrated Electronic Solutions Full systems integration optimizes machine performance and availability. Low Battery Elevated Idle. After the 16M is at low idle for an extended period and low system voltage is detected, idle speed is raised. This ensures adequate system voltage and improves battery reliability. Automatic Engine Deration. Protects the C13 engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected. Optional Automatic Blade Control.
Work Tools and Attachments The Work Tools and optional attachments for the 16M expand machine versatility, utilization and performance. Moldboard Options. A 4.9 m (16 ft) moldboard is standard on the 16M from the factory. Left and right side moldboard extensions are also available, increasing versatility. Ground Engaging Tools (GET). A wide variety of Caterpillar GET is available on the 16M, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.
Safety Safety is an integral part of all machine and system designs. Steel Tandem Walkways. Perforated raised steel walkways cover the tandems. This provides a sturdy platform for standing and walking, and additional protection for the brake lines. ROPS/FOPS Cab. Isolation mounted to the frame to reduce vibration and sound, the integral ROPS/FOPS structure meets ISO and SAE criteria for operator protection. Operator Presence System.
Window-Cleaning Platform. The optional window-cleaning platform provides easy access to all windows. Rearview Camera. Visibility is further enhanced with an optional Work Area Vision System (WAVS) through a 178 mm (7 in) LCD color monitor in the cab. Developed specifically for rugged applications, this durable camera improves productivity and increases operator awareness of surroundings. High Intensity Discharge (HID) Lighting. Optional HID lights can replace the standard halogen lamps.
Serviceability and Customer Support Simplified service, world-class product support and Cat® dealer-trained experts keep your fleet up and running, maximizing your equipment investment. Grouped Service Points. The 16M groups daily service points in the left side service center to help ensure proper maintenance and inspection routines. Extended Service Intervals.
Engine Engine Model Base Power (1st gear) – Net VHP range – Net VHP Plus range – Net Displacement Bore Stroke Torque rise Max torque Speed @ rated power Number of cylinders Derating altitude Cat® C13 ACERT™ VHP 221 kW 297 hp 221-233 kW 297-312 hp 221-248 kW 297-332 hp 12.5 L 763 in3 130 mm 5.1 in 157 mm 6.
Operating Specifications Top Speed – Fwd. Top Speed – Rev. Turning radius, outside front tires Steering range – left/right Articulation angle – left/right Fwd. 1st Fwd. 2nd Fwd. 3rd Fwd. 4th Fwd. 5th Fwd. 6th Fwd. 7th Fwd. 8th Rev. 1st Fwd. 2nd Fwd. 3rd Fwd. 4th Fwd. 5th Fwd. 6th Tandems 53.9 km/h 42.6 km/h 8.9 m 47.5° 20° 4.5 km/h 6.3 km/h 9 km/h 12.4 km/h 19.3 km/h 26.8 km/h 37 km/h 53.9 km/h 3.6 km/h 6.8 km/h 9.8 km/h 15.2 km/h 29.3 km/h 42.6 km/h 33.5 mph 26.5 mph 29 ft 3 in 2.8 mph 3.9 mph 5.
Ripper Ripping depth, maximum Ripper shank holders Shank holder spacing – min Shank holder spacing – max Penetration force Pryout force Machine length increase, beam raised Standards 452 mm 7 445 mm 500 mm 10 163 kg 15 323 kg 1610 mm 17.8 in 17.5 in 20 in 22,140 lb 33,788 lb 63.
Dimensions All dimensions are approximate, based on standard machine configuration with 18.00-25 12PR (G-2) tires. 1 10 9 2 8 11 3 4 12 5 13 6 7 1 2 3 4 5 6 7 Height – top of cab Height – front axle center Length – between tandem axles Length – front axle to moldboard Length – front axle to mid tandem Length – front tire to rear of machine Length – counterweight to ripper 22 3703 mm 688 mm 1841 mm 3069 mm 6985 mm 9963 mm 11 672 mm 16M Motor Grader specifications 145.8 in 27.1 in 72.5 in 120.
Standard Equipment Standard equipment may vary. Consult your Caterpillar dealer for details.
Optional Equipment Optional equipment may vary. Consult your Caterpillar® dealer for details.
Notes 16M Motor Grader specifications 25
Notes 26 16M Motor Grader specifications
Notes 16M Motor Grader specifications 27
16M Motor Grader For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2007 Caterpillar All Rights Reserved Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options.
