Owner's manual
13
Operating Specifications
– Backhoe
Turning Circle:
outside, front wheels
8.18 m 26 ft 10 in
Turning Circle:
outside, widest
loading bucket
10.97 m 36 ft
ISO 5010.
2WD, 4WD (inner wheel not braked).
Service Refills
Cooling System 20.5 L 5.4 gal
Fuel Tank 170 L 45 gal
Engine Oil w/Filter 7.6 L 2 gal
Transmission-Torque
Converter, 4WD,
Power Shuttle
18.5 L 4.9 gal
Transmission-Torque
Converter, 4WD,
Auto Shift
19 L 5 gal
Rear Axle 16.5 L 4.4 gal
Rear Axle,
Planetaries
1.7 L 0.4 gal
Front Axle, 4WD 11 L 2.9 gal
Front Axle,
Planetaries
0.7 L 0.2 gal
Hydraulic System 95 L 25.1 gal
Hydraulic Tank 38 L 10 gal
Standards
Brakes SAE J/ISO 3450,
ISO 3450 1996
Cab – ROPS SAE J1040 May 1994/
ISO 3741 1994
Cab – FOPS SAE J/ISO 3449
APR98 LEVEL II
and ISO 3449: 1992
LEVEL II
Cab – Sound ANSI/SAE J1166
Oct 98 is 80 dB (A)
Exterior Sound SAE J88 JUN86 is
76 dB (A)
•
•
Axle Ratings
Front Axle, 2WD,
Static
22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Front Axle, 4WD,
Static
22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Rear Axle, Static 22 964 kg 50,582 lb
Dynamic 9186 kg 20,233 lb
Axle Oscillation 10 Degrees
4WD and 2WD axles are pendulum
mounted and permanently sealed and
lubricated, requiring no daily maintenance.
Also features double-acting steering
cylinder with 52° steering angle for
increased maneuverability.
Engine Features
Three-ring pistons made of lightweight,
silicon/aluminum alloy for strength and
maximum thermal conductivity.
Forged chrome/molybdenum-steel crankshaft
with crankshaft with either induction
hardened or nitrocarburized journals.
Front and rear crankshaft oil seals are “lip”
type Viton and PTFE designs featuring an
integral dust lip.
Heat resistant, silicone-chrome steel intake
and STELLITE-faced exhaust valves
provide long life.
Cylinder block is high strength, cast iron
alloy of deep skirt, monobloc design for
increased strength and long life.
Cylinder head is high strength, cast iron
alloy construction with extra duty wall and
deck thickness. Intake and exhaust ports are
precision cast to promote optimum gas ow.
Direct injection fuel system provides
accurate fuel delivery; remote mounted
electric lift pump improves serviceability.
Dry-type axial seal air cleaner with integral
precleaner, automatic dust ejection system,
and lter condition indicator.
Direct electric, 12-volt starting and
charging system with 880 CCA Group 31
maintenance free battery.
Standard glow plug starting aid system
for efcient cold weather starting.
High contact ratio/gear train, peripheral
xed isolation top cover and open deck
block design reduce bare engine noise.
Higher low end torque for better engine/
machine performance.
•
•
•
•
•
•
•
•
•
•
•
•
•
Tires
Choices listed as combination
of front/rear tires:
12.5/80-18 NHS (12 ply) 1-3 Super
Traction/19.5L-24 (12 ply) R4 ATU
12.5/80-18 NHS (12 ply) 1-3 Super
Traction/21L-24 (16 ply) R4 ATU
340/80R 18 XMCL/500/70R 24 XMCL
340/80R 18 XMCL/19.5L-R24 (12 ply)
R4 ATU
Brakes
Features:
Brakes meet the following standards:
SAE J1473 and ISO 3450 requirements.
Self-adjusting, completely enclosed and
sealed.
Foot operated brake pedals can be
interlocked for roading.
Parking/secondary brakes are independent
of the service brake system. Parking brake is
mechanically applied through an adjustable
hand lever located on the right console.
•
•
•
•
•
•
•
•