Manual

ManualsBrandsMilton CAT ManualsGeneratorsC175 Spec Sheet

PRELIMINARY SPEC SHEET

Diesel Generator Set – 3,000 ekW – 60 Hz

PRELIMINARY 1 of 5 2/6/2006

Information contained in this publication may be considered confidential. www.cat-ElectricPower.com

Discretion is recommended when distributing.

C175-16 Standby

3,000 ekW / 3,750 kVA- 60 Hz – 1800 RPM

480 – 12,470 – 13,200 – 13,800 and 4,160 Volts

System Standard

Air Inlet

• Single element canister type air cleaners

• Service indicator

Cooling

• Radiator with guard (43

C ambient temperature)

• Coolant drain line with valve

• Caterpillar Extended Life Coolant

Exhaust

• Dry exhaust manifold

• Flanged faced outlets (ANSI / DIN)

Fuel

• Secondary fuel filters

• Fuel priming pump

• Flexible fuel lines

• Fuel cooler (optional)

Generator

• IE (LV) and PMG (MV, HV)

• Class H insulation

• Class H temperature (150

C rise)

• CDVR voltage regulator

• Reactive droop

• Bus bar connections

• Winding temperature sensors std PM @ 480 Volt (opt for LV)

• Anti-condensation space heaters (opt for LV)

• Bearing temperature sensors – option (opt for LV)

Governing System

• Caterpillar ADEM

A4 speed control governor

Control Panels

• EMCP 3 (package mounted)

Lube System

• Lubricating oil and filter

• Oil drain line with valves

• Fumes disposal

• Gear type lube oil pump

Mounting

• Rubber, anti-vibration mounts (shipped loose)

Starting/Charging

• 24 Volt starting motor(s)

• 45 Amp charging alternator

• Batteries with rack and cables

• Battery disconnect switch

General

• Right-hand service

• Paint – Caterpillar Yellow except rails and radiators gloss black

• SAE standard rotation

• Flywheel and flywheel housing – SAE No. 0

Note For any additional options, consult the factory

Identify used herein, are trademarks of Caterpillar and may not be used without permission. Printed in U.S.A.

Summary of content (5 pages)

PAGE 1
PRELIMINARY SPEC SHEET Diesel Generator Set – 3,000 ekW – 60 Hz C175-16 Standby 3,000 ekW / 3,750 kVA- 60 Hz – 1800 RPM 480 – 12,470 – 13,200 – 13,800 and 4,160 Volts System Air Inlet Cooling Exhaust Fuel Generator Governing System Control Panels Lube System Mounting Starting/Charging General Note PRELIMINARY Standard • Single element canister type air cleaners • Service indicator • Radiator with guard (43oC ambient temperature) • Coolant drain line with valve • Caterpillar Extended Life Coolant •
PAGE 2
PRELIMINARY SPEC SHEET Diesel Generator Set – 3,000 ekW – 60 Hz Specifications CAT Generator CAT EMCP3 Control Panels • EMCP 3.1 (Standard) • EMCP 3.2 & 3.3 (Optional) • 24 Volt DC control • Generator instruments designed to meet UL/CSA/CE/UL508A • Integral generator terminal box • Single location for customer connection • MODBUS isolated data link (RS-485 half-duplex) supports serial communication at data rate up to 115.
PAGE 3
PRELIMINARY SPEC SHEET Diesel Generator Set – 3,000 ekW – 60 Hz Generator Set Technical Data C175-16, 60Hz, 1800 RPM Package Performance Genset Power rating with fan Genset Power rating @ 0.8 pf Fuel Consumption 100% load with fan 75% load with fan 50% load with fan Cooling System Radiator air flow rate @ 0.5 external static restriction Inlet Air Combustion air inlet flow rate Standby – EPA Tier 2 3,000 ekW 3,750 kVA Standby – Low BSFC 3,000 ekW 3,750 kVA 794.3 L/hr 579.9 L/hr 423.9 L/hr 209.
PAGE 4
PRELIMINARY SPEC SHEET Diesel Generator Set – 3,000 ekW – 60 Hz Preliminary Package Dimensions without Radiator 1840 Frame Package Dimensions Length Width Height Weight 5,894.8 mm 1,650.5 mm 2,248.5 mm 18,800 kg Note: Do not use for installation design. Consult factory for final configuration. 227.7 in 65.0 in 88.5 in 41,500 lbs 1860 Frame Package Dimensions Length Width Height Weight 6,004.8 mm 1,650.5 mm 2,248.5 mm 18,800 kg Note: Do not use for installation design.
PAGE 5
PRELIMINARY SPEC SHEET Diesel Generator Set – 3,000 ekW – 60 Hz Preliminary Horizontal Radiator Dimensions 43°C Radiator 4,714.2 mm 185.6 in Length 2,279.7 mm 89.75 in Width 2,561.8 mm 100.86 in Height 5,102 kg 11,248 lbs Weight Materials and specifications are subject to change without notice. Note: Do not use for installation design. Consult factory for final configuration.