User guide

LEHE5521-01
STANDBY 125-150 kW
PRIME 114-135 kW
60 Hz
FEATURES
GENERATOR SET
Complete system designed and built at ISO 9001
certified facilities
Factory tested to design specifications at full
load conditions
ENGINE
Governor, electronic
Electrical system, 12 VDC
Cartridge type filters
Battery rack and cables
Coolant and lube drains piped to edge of base
GENERATOR
Insulation system, class H
Drip proof generator air intake (NEMA 2, IP23)
Electrical design in accordance with BS5000
Part 99, EN61000-6, IEC60034-1, NEMA MG-1.33
CONTROL SYSTEM
EMCP 3.1 digital control panel
Vibration isolated NEMA 1 enclosure with
lockable hinged door
DC and AC wiring harnesses
MOUNTING ARRANGEMENT
Heavy-duty fabricated steel base with lifting points
Anti-vibration pads to ensure vibration isolation
Complete OSHA guarding
Stub-up pipe ready for connection to silencer
pipework
Flexible fuel lines to base with NPT connections
COOLING SYSTEM
Radiator and cooling fan complete with
protective guards
Standard ambient temperatures up to 50° C
(122° F)
CIRCUIT BREAKER
UL/CSA listed
3-pole with solid neutral
NEMA 1 steel enclosure, vibration isolated
Electrical stub-up area directly below circuit
breaker
AUTOMATIC VOLTAGE REGULATOR
Voltage within ± 0.5% 3-phase at steady state
from no load to full load
Provides fast recovery from transient load changes
EQUIPMENT FINISH
All electroplated hardware
Anticorrosive paint protection
High gloss polyurethane paint for durability
and scuff resistance
QUALITY STANDARDS
BS4999, BS5000, BS5514, EN61000-6, IEC60034,
NEMA MG-1.33, NFPA 110 (with optional
equipment)
DOCUMENTATION
Operation and maintenance manuals provided
Wiring diagrams included
WARRANTY
All equipment carries full manufacturer’s
warranty.
DIESEL GENERATOR SET
Standby Prime
Model
kW (kVA) kW (kVA)
D125-6 125 (156.3) 114 (142.5)
D150-8 150 (187.5) 135 (168.8)
Tier 3 EPA Approved, Emissions Certified
Picture shown may not
reflect actual package

Summary of content (8 pages)