Owner manual

ManualsBrandsMilton CAT ManualsGeneratorsD40-6S 40 kW Spec Sheet

FUEL/EMISSIONS STRATEGY

• EPA Certied for Stationary

Emergency Application

(EPA Tier 3 emissions levels)

FULL RANGE OF ATTACHMENTS

• Wide range of bolt-on system expansion

attachments, factory designed and tested

• Flexible packaging options for easy and cost

effective installation

SINGLE-SOURCE SUPPLIER

• Fully prototype tested with certied torsional

vibration analysis available

WORLDWIDE PRODUCT SUPPORT

• Cat dealers provide extensive post sale support

including maintenance and repair agreements

• Cat dealers have over 1,800 dealer branch stores

operating in 200 countries

• The Cat S•O•S

program cost effectively detects

internal engine component condition, even the

presence of unwanted uids and combustion

by-products

Cat

Model D40-6S, Single Phase

CAT C4.4 DIESEL ENGINE

• Reliable, rugged, durable design

• Field-proven in thousands of applications worldwide

• Four-stroke diesel engine combines consistent

performance and excellent fuel economy with

minimum weight

• Electronic engine control

GENERATOR SET

• Complete system designed and built at ISO 9001

certied facilities

• Factory tested to design specications at full load

conditions

CAT EMCP 4 CONTROL PANELS

• Simple user friendly interface and navigation

• Scalable system to meet a wide range ofcustomer

needs

• Integrated Control System and Communications

Gateway

SEISMIC CERTIFICATION

• Seismic Certication available

• Anchoring details are site specic, and are

dependent on many factors such as generator set

size, weight, and concrete strength.

IBC Certication requires that the anchoring system

used is reviewed and approved by a Professional

Engineer

• Seismic Certication per Applicable Building codes:

IBC 2000, IBC 2003, IBC 2006, IBC 2009, IBC 2012

CBC 2007, CBC 2010

• Pre-approved by OSHPD and carries an

OSP-0321-10 for use in healthcare projects in

California

STANDBY

40 ekW 40 kVA

PRIME

36 ekW 36 kVA

60 Hz 1800 rpm 240/120 Volts

Caterpillar is leading the power generation

marketplace with Power Solutions engineered

to deliver unmatched ﬂexibility, expandability,

reliability, and cost-effectiveness.

DIESEL GENERATOR SET

Image shown may not

reect actual package.

FEATURES

Summary of content (6 pages)

PAGE 1
DIESEL GENERATOR SET STANDBY 40 ekW 40 kVA PRIME 36 ekW 36 kVA 60 Hz 1800 rpm 240/120 Volts FEATURES Image shown may not reflect actual package.
PAGE 2
STANDBY 40 ekW 40 kVA PRIME 36 ekW 36 kVA 60 Hz 1800 rpm 240/120 Volts FACTORY INSTALLED STANDARD & OPTIONAL EQUIPMENT System Standard Optional Air Inlet • Dry replaceable paper element type with restriction indicator Cooling • Radiator and cooling fan complete with protective guards • Standard ambient temperatures up to 50°C (122°F) Exhaust [ ] Radiator stone guard [ ] Radiator transition flange [ ] Industrial [ ] Residential [ ] Critical mufflers [ ] Overhead silencer mounting kit Fuel • Fl
PAGE 3
STANDBY 40 ekW 40 kVA PRIME 36 ekW 36 kVA 60 Hz 1800 rpm 240/120 Volts SPECIFICATIONS CAT EMCP 4 SERIES CONTROLS EMCP 4 controls including: – Run / Auto / Stop Control – Speed and Voltage Adjust – Engine Cycle Crank – 12 volt DC operation – Environmental sealed front face – Text alarm/event descriptions STANDARD CAT GENERATOR Frame size LCB1514L Excitation Self excitation Pitch 0.
PAGE 4
STANDBY 40 ekW 40 kVA PRIME 36 ekW 36 kVA 60 Hz 1800 rpm 240/120 Volts TECHNICAL DATA Open Generator Set – 1800 rpm/60 Hz/480 Volts Tier 3 P3454C P3454D STANDBY PRIME 40 kVA 40 ekW 36 kVA 36 ekW Generator Set Package Performance Genset power rating @ 1.0 pf Genset power rating with fan Fuel Consumption 100% load with fan 75% load with fan 50% load with fan 13.4 L/hr 10.4 L/hr 7.7 L/hr 3.5 gal/hr 2.7 gal/hr 2.0 gal/hr 12.1 L/hr 9.5 L/hr 7.2 L/hr 3.2 gal/hr 2.5 gal/hr 1.
PAGE 5
STANDBY 40 ekW 40 kVA PRIME 36 ekW 36 kVA 60 Hz 1800 rpm 240/120 Volts RATING DEFINITIONS AND CONDITIONS Applicable Codes and Standards: AS1359, CSA C22.2 No 100-04, UL142, UL489, UL601, UL869, UL2200, NFPA 37, NFPA 70, NFPA 99, NFPA 110, IBC, IEC60034-1, ISO3046, ISO8528, NEMA MG 1-22, NEMA MG 1-33, 72/23/EEC, 98/37/EC, 2004/108/EC. Ratings are based on SAE J1349 standard conditions. These ratings also apply at ISO3046 standard conditions. Fuel rates are based on fuel oil to specification EPA 2D 89.
PAGE 6
STANDBY 40 ekW 40 kVA PRIME 36 ekW 36 kVA 60 Hz 1800 rpm 240/120 Volts DIMENSIONS Package Dimensions Length 1932 mm 76 in Width 1110 mm 44 in Height 1767 mm 46 in NOTE: For reference only – do not use for installation design. Please contact your local dealer for exact weight and dimensions. (General Dimension Drawing #3736509). www.Cat-ElectricPower.com Performance No.: P3454C/D 2013 Caterpillar All rights reserved.