User Manual

ManualsBrandsMilton ManualsBrake System ToolsThe Brake Releaser® - Turbo Boosting De-icer Delivery System

www.miltonindustries.com

The Brake Releaser

by Milton

Operating Instructions and Parts Manual

TABLE of CONTENTS

Product Introduction ………………………………………………………… 2

General Safety Information .………………………………………………... 2

Configurations ………………………………………………………………... 3

Application …………………………………………………………………….. 3

Dangerous Practices ……………..………………………………………….. 5

Servicing of a Pressurized Device ………………………………………… 5

Operating Instructions ………………………………………………………. 5

Troubleshooting ………………………………………………………………. 7

Warranty Information ………………………………………………………… 7

Summary of content (8 pages)

PAGE 1
The Brake Releaser® by Milton® Operating Instructions and Parts Manual TABLE of CONTENTS Product Introduction ………………………………………………………… 2 General Safety Information .………………………………………………... 2 Configurations ………………………………………………………………... 3 Application …………………………………………………………………….. 3 Dangerous Practices ……………..………………………………………….. 5 Servicing of a Pressurized Device ………………………………………… 5 Operating Instructions ………………………………………………………. 5 Troubleshooting ……………………………………………………………….
PAGE 2
The Brake Releaser® by Milton® Operating Instructions and Parts Manual PRODUCT INTRODUCTION The Brake Releaser® by Milton® is a tool that utilizes de-icing fluid to release frozen brake lines and to pre-treat brake lines in cold weather. The tool is ONLY to be used while the TRUCK IS STATIONARY. NEVER DRIVE WHEN THE BRAKE RELEASER® IS IN PLACE. Always remove and store The Brake Releaser® before driving. See ‘Important Safety Instructions’ section of this manual for more information.
PAGE 3
The Brake Releaser® by Milton® Operating Instructions and Parts Manual CONFIGURATIONS 2800S-KIT 2810A-KIT The Brake Releaser® Standard Kit The Brake Releaser® Kit w/ Accessories 1 The Brake Releaser® Unit 1 The Brake Releaser® Unit 1 45° Outlet 1 45° Outlet 1 Straight Outlet 1 Straight Outlet 1 Instruction Manual 1 Instruction Manual 1 Safety Glasses 1 Safety Gloves 1 Carrying Bag APPLICATION Use the glad hand connection with the straight outlet for applications using flatbeds, du
PAGE 4
The Brake Releaser® by Milton® Operating Instructions and Parts Manual ® Some components of The Brake Releaser are provided pre-assembled. Pieces may be connected with thread sealing/thread locking products. Disassembling the unit may cause damage to the parts. See section “Replacement Parts and Customer Service” of manual for replacement parts information. ® To assemble The Brake Releaser : 1. Place main reservoir (bowl) in hand so that the “Milton” logo faces you.
PAGE 5
The Brake Releaser® by Milton® Operating Instructions and Parts Manual DANGEROUS PRACTICES RISK OF INJECTION OR SEVERE INJURY  ® This unit uses high pressure. Keep clear of The Brake Releaser when under pressure.
PAGE 6
The Brake Releaser® by Milton® Operating Instructions and Parts Manual OPERATION INSTRUCTIONS (cont.) ® 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
PAGE 7
The Brake Releaser® by Milton® Operating Instructions and Parts Manual TROUBLESHOOTING ® Review the following common occurrences which may occur while operating The Brake Releaser , for problems not listed below, or for further clarification, contact customer service: 1. Issue: Reservoir Lid (2) cannot be removed from bowl after use Resolution: Relieve pressure from device by engaging Ball Control Valve (4) or releasing pressure in cab. ® 2.
PAGE 8
The Brake Releaser® by Milton® Operating Instructions and Parts Manual THIS LIMITED WARRANTY IS EXCLUSIVE AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. ® MILTON INDUSTRIES, INC. , MAKES NO EXPRESS OR IMPLIED WARRANTY WHATSOEVER OF MERCHANTABILITY, FITNESS FOR ® ANY PURPOSE OR OTHERWISE. THE LIABILITY OF MILTON INDUSTRIES, INC.