OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. No de cat. 0729-20 28 VOLT DEEP CUT BAND SAW SCIE À RUBAN POUR COUPE PROFONDE 28 V SIERRA CONTINUA PARA CORTES PROFUNDOS DE 28 V TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL OPERADOR.
GENERAL POWER TOOL SAFETY WARNINGS WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. attached to a rotating part of the power tool may WORK AREA SAFETY result in personal injury.
ASSEMBLY Blades WARNING Recharge only with the char- Changing 1. REMOVE BATTERY PACK BEFORE CHANG- ger specified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery. ING OR REMOVING BLADES. 2. Turn the tension lock handle located on the front of the saw 180° counterclockwise. This releases the tension on the blade for easy removal. 3. Remove the blades from the pulleys first and then from the guides. 4.
ACCESSORIES WARNING Always remove battery pack MAINTENANCE WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs. before changing or removing accessorie. Only use accessories specifically recommended for this tool. Others may be hazardous.
RÈGLES DE SÉCURITÉ GÉNÉRALES RELATIVES AUX OUTILS ÉLECTRIQUES AVERTISSEMENT LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ. Ne pas suivre l’ensemble des règles et instructions peut entraîner une électrocution, un incendie ou des blessures graves. Conserver les règles et les instructions à des fins de référence ultérieure. Le terme «outil électrique» figurant dans les avertissements cidessous renvoie à l’outil électrique à alimentation par le réseau (à cordon) ou par batterie (sans fil).
SPÉCIFICATIONS MANIEMENT Capacités No de Volts Pieds par Cat. CD minute Lames recommandées Matériau rond Matériau rectangulaire 0729-20 28 Bas 0 - 225 Lame bimétallique 120 mm (4-3/4") 120 mm x 120 mm Haut 0 - 350 1140 mm x 13 mm x .5 mm (4-3/4" x 4-3/4") (44-7/8" x 1/2" x .020") Utilisez les batteries seulement de MILWAUKEE M28™ ou V28®. MONTAGE DE L’OUTIL AVERTISSEMENT Ne recharger la batterie qu’avec le chargeur spécifié.
ENTRETIEN AVERTISSEMENT Pour ACCESOIRES AVERTISSEMENT Retirez toujours la batterie avant de changer ou d’enlever les accessoires. L’utilisation d’autres accessoires que ceux qui sont spécifiquement recommandés pour cet outil peut comporter des risques. minimiser les risques de blessures corporelles, débranchez le chargeur et retirez la batterie du chargeur ou de l’outil avant d’y effectuer des travaux d’entretien. Ne démontez jamais l’outil, la batterie ou le chargeur.
ADVERTENCIAS DE SEGURIDAD GENERALES PARA LA HERRAMIENTA ELÉCTRICA ADVERTENCIA LEA TODAS LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD. Si no sigue todas las advertencias e instrucciones, se pueden provocar una descarga eléctrica, un incendio o lesiones graves. Guarde todas las advertencias e instrucciones para consultarlas en el futuro.
ESPECIFICACIONES OPERACION Capacidades Cat. Volts Pies por Cuchillas No. cd minuto recomendadas Material redondo Material rectangular 0729-20 28 Baja 0 - 225 1140 mm x 13 mm x .5 mm 120 mm (4-3/4") 120 mm x 120 mm Alta 0 - 350 (44-7/8" x 1/2" x .020") de (4-3/4" x 4-3/4") aleación bimetálica Utilice solamente las baterías de MILWAUKEE M28™ oo V28®. ENSAMBLAJE ADVERTENCIA Recargue la batería 6 Dientes por pulg. sólo con el cargador especificado para ella.
ACCESORIOS ADVERTENCIA Para reducir el riesgo MANTENIMIENTO ADVERTENCIA Para reducir el riesgo de lesiones, siempre extraiga la batería antes de cambiar o retirar accesorios. Utilice únicamente accesorios específicamente recomendados para esta herramienta. El uso de accesorios no recomendados podría resultar peligroso. de una lesión, desconecte siempre la herramienta antes de darle cualquier mantenimiento. Nunca desarme la herramienta ni trate de hacer modificaciones en el sistema eléctrico de la misma.
UNITED STATES MILWAUKEE Service MILWAUKEE prides itself in producing a premium quality product that is NOTHING BUT HEAVY DUTY®. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, or you would like to locate the factory Service/Sales Support Branch or authorized service station nearest you, please call... Additionally, we have a nationwide network of authorized Distributors ready to assist you with your tool and accessory needs.