Service Parts List S/N A58A & A58B

48
WARNI N G
SWITCH POLARITY SENSITIVE
If wired incorrectly with connector
block #16, switch #17 will be
damaged and destroyed!
!
ROUTE THE RED BRUSH ASSEMBLY
LEADWIRE #49 THROUGH THE
WIRE TRAPS, AS SHOWN.
ROUTE THE BLACK BRUSH
ASSEMBLY LEADWIRE #50 THROUGH
THE WIRE TRAPS, AS SHOWN.
Terminals, Connectors and 1 or 2 End Wire Preparation
Wire
Color
Origin or
Gauge
Wire
No.
Length
WIRING SPECIFICATIONS
TERMINAL DESCRIPTION
Part No.Code Qnty.
47 Black 23-94-0279 ----- Leadwire Assembly.
48 Red 23-94-0179 ----- Leadwire Assembly.
49 Red 22-18-2080 ----- Carbon Brush Assembly - Red
50 Black 22-18-1980 ----- Carbon Brush Assembly - Black
BULK LEAD WIRE - BULLETIN NO. 58-01-0003
THESE VIEWS OF THE
CONNECTOR BLOCK ASSEMBLY ARE
SHOWN WITHOUT THE CONNECTOR
BLOCK COVER FOR CLARITY.
CONNECT THE TERMINALS OF
LEADWIRE ASSEMBLIES 47 AND 48
TO THE TABS ON THE BOTTOM OF
THE SWITCH AND SOLDER.
ROUTE THE LEADWIRES
BETWEEN THE POSTS.
50
49
47
30
53
39
30
39
33
53 54
55 56
57
55
54
56
FIG. PART NO. DESCRIPTION OF PART NO.REQ.
30 44-60-1170 Detent Pin (1)
33 14-73-0145 Anvil Assembly (1)
39 44-50-8320 Detent Spring (1)
55 44-60-0465 Pivot Pin (1)
FIG. PART NO. DESCRIPTION OF PART NO.REQ.
53 44-60-0567 Detent Pin (1)
54 40-50-0895 Detent Spring (1)
56 --------------- 1/2" Square Anvil (1)
57 14-73-0455 Anvil Assembly (1)