Operator`s manual

page 13
Keep your tool, battery pack and charger
in good repair by adopting a regular
maintenance program. After six months to
one year, depending on use, return thetool,
battery pack and charger to A MILWAUKEE
service facility for:
• Lubrication
• Mechanical inspection and cleaning
(gears, spindles, bearings, housing,
etc.)
• Electrical inspection (battery pack,
charger, motor)
• Testing to assure proper mechanical and
electrical operation
Maintaining Tool
If the tool does not start or operate at full
power with a fully charged battery pack,
clean the contacts on the battery pack. If
the tool still does not work properly, return
the tool, charger and battery pack, to a
MILWAUKEE service facility for repairs.
MAINTENANCE
To reduce the risk of injury, always
unplug the charger and remove
the battery pack from the charger
or tool before performing any
maintenance. Never disassemble the
tool, battery pack or charger. Contact
a MILWAUKEE service facility for ALL
repairs.
WARNING
ACCESSORIES
For a complete listing of accessories refer to
your MILWAUKEE Electric Tool catalog or go
online to www.milwaukeetool.com. To obtain
a catalog, contact your local distributor or
a service center listed on the back cover of
this operator’s manual.
Cleaning
Clean dust and debris from charger and
tool vents. Keep tool handles clean, dry
and free of oil or grease. Use only mild
soap and a damp cloth to clean the tool,
battery pack and charger since certain
cleaning agents and solvents are harmful
to plastics and other insulated parts. Some
of these include gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household
detergents containing ammonia. Never use
flammable or combustible solvents around
tools.
Repairs
For repairs, return the tool, battery pack and
charger to the nearest service center listed on
the back cover of this operator's manual.
To reduce the risk of personal injury
and damage, never immerse your
tool, battery pack or charger in liquid
or allow a liquid to flow inside them.
WARNING
Always remove battery pack before
changing or removing accessories.
Only use accessories specifically
recommended for this tool. Others
may be hazardous.
WARNING