Operator`s manual

page 5
SPECIFIC SAFETY RULES
1. Use auxiliary handles supplied with the tool. Loss of control can cause personal
injury.
2. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
3. Hold tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live” and shock the operator.
4. Keep hands away from all cutting edges and moving parts.
5. Maintain labels and nameplates. These carry important information. If unreadable or
missing, contact a MILWAUKEE service facility for a free replacement.
6. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to filter out microscopic particles.
Specifications
Symbology
Direct Current
Underwriters Laboratories, Inc.,
United States and Canada
No Load Revolutions per Minute (RPM)
Cat. No. Volts DC No Load RPM
No Load Blows
per Minute
0824-20 18 450/1700 7200/27,200
0822-20 18 450/1700
N/A