Testing Results

*A 7/8 cutting depth X 1/8” cutting width reflects the highest dust generating application for this tool, suggesting that
other wheel depths and widths would also be compliant when using the Milwaukee M18™ FUEL™ 3-in-1 Backpack
Vacuum
Details on how to properly implement as a part of a complete exposure plan are outlined below*:
1/16"
5/64"
1/8"
1/4”
196
156
98
1/2”
98
78
49
3/4”
65
52
32
7/8”
56
44
28
* These calculations are offered for reference and are calculated values based on previously recorded test data and
represent a full work day of the tested application
** The user must drill the same number or fewer holes than those listed above for the given application in order to be
considered compliant with the objective data clause of 29 CFR 1926.1153 OSHA regulation on crystalline silica dust.
It is the responsibility of the user to operate the tool in accordance with manufacturer’s instructions. For the latest listings
of approvals, visit milwaukeetool.com. For technical or service assistance, contact Milwaukee Customer Service at 1-800-
729-3878.
Cutting Width
Cutting Depth
Maximum Number of Feet cut per Hour **