OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Catalog No. No de Cat. Catálogo No. 1610-1 1630-1 1660-1 1660-6 1663-20 HEAVY-DUTY COMPACT HOLE-SHOOTERS PERCE-TROUS COMPACTS ET EXTRA ROBUSTES TALADROS HEAVY-DUTY HOLE-SHOOTERS TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE MANUEL DE L'UTILISATEUR.
GENERAL SAFETY RULES — FOR ALL POWER TOOLS WARNING! READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-opearted (cordless) power tool. SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2.
SPECIFIC SAFETY RULES 1. 2. 3. 4. 5. 6. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Keep hands away from all cutting edges and moving parts.
GROUNDING EXTENSION CORDS WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the cord or plug is damaged. If damaged, have it repaired by a MILWAUKEE service facility before use.
Installing Bits into Keyed Chucks (Fig. 2) OPERATION Fig. 2 WARNING! To reduce the risk of personal injury when drilling, always hold tool by the insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Bracing for forward rotation (Fig. 5) Reversing (Fig. 7 & 8) Fig. 7 Fig. 5 Fig. 8 C B A When drilling in forward, the bit will rotate in a clockwise direction. If the bit binds in the hole, the bit will come to a sudden stop and drill will suddenly react in a counterclockwise direction. Figure 5 shows an example of a Compact Hole-Shooter properly braced for forward rotation. A reversing switch is located below (Fig. 7) or above (Fig. 8) the trigger switch for removal of bits from holes.
MAINTENANCE ACCESSORIES WARNING! To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs. Maintaining Tools Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage.
RÈGLES GÉNÉRALES DE SÉCURITÉ POUR LES OUTILS ÉLECTRIQUE AVERTISSEMENT! LIRE SOIGNEUSEMENT TOUTES LES INSTRUCTIONS Le non respect des instructions ci-après peut entraîner des chocs électriques, des incendies et/ou des blessures graves. Le terme «outil électrique» figurant dans les avertissements ci-dessous renvoie à l’outil électrique à alimentation par le réseau (à cordon) ou par batterie (sans fil). CONSERVER CES INSTRUCTIONS SÉCURITÉ DU LIEU DE TRAVAIL 1. 2. 3.
RÈGLES DE SÉCURITÉ PARTICULIÈRE 1. 2. 3. 4. 5. 6. Utiliser les poignées auxiliaires fournies avec l’outil. Une perte de contrôle peut provoquer des blessures. Porter des protège-oreilles avec un marteau perforateur. Une exposition au bruit peut provoquer une perte auditive. Tenir l’outil par les surfaces de prise isolées si, au cours des travaux, l’outil de coupe risque d’entrer en contact avec des fils cachés ou avec son propre cordon.
MISE À LA TERRE AVERTISSEMENT! Si le fil de mise à la terre est incorrectement raccordé, il peut en résulter des risques de choc électrique. Si vous n’êtes pas certain que la prise dont vous vous servez est correctement mise à la terre, faites-la vérifier par un électricien. N’altérez pas la fiche du cordon de l’outil. N’enlevez pas de la fiche, la dent qui sert à la mise à la terre. N’employez pas l’outil si le cordon ou la fiche sont en mauvais état.
Pose des Mèches dans le Mandrin à Clé (Fig. 2) MANIEMENT Fig. 2 AVERTISSEMENT! Pour réduire le risque de blessures corporelles, lorsque vous utilisez la perceuse pour des travaux où l'outil peut venir en contact avec des fils électriques sous tension, tenez-la tourjours par ses surfaces de prise isolées. Le contact de la perceuse avec un fil électrique sous tension à leur tour et constituera un risque de choc électrique pour l'utilisateur. 1. Débranchez l'outil. 2.
Inversion (Fig. 7 & 8) Étayage en rotation avant (Fig. 5) Fig. 7 Fig. 5 Fig. 8 C B A Lorsque vous drillez en rotation avant (sens horaire), si la mèche se coince dans le trou, la foreuse subira un brutal mouvement en sens contraire. Pour faciliter le retrait de la mèche d'un trou, un inverseur de rotation est placé sous la commande (Fig. 7). Dans le cas de la perceuse No 1663-20, l'inverseur est placé au-dessus de la commande (Fig. 8).
MAINTENANCE ACCESSOIRES AVERTISSEMENT! Pour minimiser les risques de blessures, débranchez toujours l’outil avant d’y effectuer des travaux de maintenance. Ne faites pas vous-même le démontage de l’outil ni le rebobinage du système électrique. Consultez un centre de service MILWAUKEE accrédité pour toutes les réparations. Entretien de l’outil Gardez l’outil en bon état en adoptant un programme d’entretien ponctuel. Avant de vous en servir, examinez son état en général.
REGLAS DE SEGURIDAD GENERALES PARA HERRAMIENTAS ELÉCTRICAS ¡ADVERTENCIA! LEA TODAS LAS INSTRUCCIONES Si no se siguen todas las siguientes instrucciones se puede provocar una descarga eléctrica, un incendio y/o lesiones graves. El término “herramienta eléctrica” en todas las advertencias incluidas más abajo se refiere a su herramienta operada por conexión (cable) a la red eléctrica o por medio de una batería (inalámbrica). GUA0RDE ESTAS INSTRUCCIONES SEGURIDAD EN EL ÁREA DE TRABAJO 1. 2. 3.
REGLAS ESPECIFICAS DE SEGURIDAD 1. Use los asideros auxiliares que se suministran con la herramienta. La pérdida de control puede provocar lesiones personales. 2. Lleve protectores auditivos cuando use la broca de impacto. La exposición a ruido puede producir la pérdida de la audición. 3. Agarre la herramienta por los asideros aislados cuando realice una operación en la que la herramienta de corte pueda entrar en contacto con cables ocultos o con su propio cable.
TIERRA ¡ADVERTENCIA! Puede haber riesgo de descarga eléctrica si se conecta el cable de conexión de puesta a tierra incorrectamente. Consulte con un electricista certificado si tiene dudas respecto a la conexión de puesta a tierra del tomacorriente. No modifique el enchufe que se proporciona con la herramienta. Nunca retire la clavija de conexión de puesta a tierra del enchufe. No use la herramienta si el cable o el enchufe está dañado.
Instalación de las Brocas (Fig. 2) OPERACION Fig. 2 ¡ADVERTENCIA! Para reducir el riesgo de daños personales cuando perfore, siempre agarre la herramienta por las superficies aisladas cuando realiza una operación donde la herramienta cortadora puede contactar alambres que no se pueden ver o su propio cordón. Contactar un alambre con corriente hará que las partes metálicas expuestas de la herramienta tenga un corriente y dará una descarga al operador. 1. Desconecte la herramienta. 2.
Apoyo para rotaciones hacia adelante (Fig. 5) Reversa (Fig. 7 & 8) Fig. 7 Fig. 5 Fig. 8 C B A Cuando se taladra hacia adelante, la broca se rotará en el sentido de las agujas del reloj. Si la broca se atasca en la perforación, la broca se parará de repente y el taladro se reaccionará de repente en el sentido contrario de las agujas del reloj. La figura 5 muestra un ejemplo de una perforadora compacta apoyada correctamente para una rotación hacia adelante. A.
MANTENIMIENTO ¡ADVERTENCIA! Para reducir el riesgo de lesiones, desconecte siempre la herramienta antes de darle cualquier mantenimiento. Nunca desarme la herramienta ni trate de hacer modificaciones en el sistema eléctrico de la misma. Acuda siempre a un Centro de Servicio MILWAUKEE para TODAS las reparaciones. Mantenimiento de las herramientas Adopte un programa regular de mantenimiento y mantenga su herramienta en buenas condiciones. Antes de usarla, examine las condiciones generales de la misma.
UNITED STATES CANADA MILWAUKEE Service Service MILWAUKEE MILWAUKEE prides itself in producing a premium quality product that is NOTHING BUT HEAVY DUTY®. Your satisfaction with our products is very important to us! MILWAUKEE est fier de proposer un produit de première qualité NOTHING BUT HEAVY DUTY®. Votre satisfaction est ce qui compte le plus! En cas de problèmes d’utilisation de l’outil ou pour localiser le centre de service/ventes ou le centre d’entretien le plus proche, appelez le...