Service Parts List

MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. Lisbon Road, Brookfield, WI 53005
Drwg. 2
FIG. PART NO. DESCRIPTION OF PART QTY.
3 02-04-0852 Ball Bearing (1)
5 02-04-1204 Ball Bearing (1)
10 05-78-0305 M3.5 x 0.6 x 7mm Pan Hd. Slotted T-15 (4)
19 06-82-5554 10-24 x 2.375 Taptite T-25 (2)
20 06-82-5584 10-24 x 1.50 Taptite T-25 (2)
21 06-82-7375 8-16 x 2.50 Slotted Plastite T-20 (2)
22 06-82-9220 K40 x 5/8 Slotted PT T-20 (7)
24 12-98-7305 Service Nameplate (1)
26 16-50-1095 Armature Assembly (1)
27 18-50-1095 Field (1)
28 22-20-0150 Brush Holder Assembly (2)
29 22-64-1260 Cord Assembly (1)
30 23-66-2270 On/Off Switch (1)
31 23-66-2365 Reversing Switch Assembly (1)
32 23-94-2270 Lead Wire Assembly (1)
36 31-05-0240 Baffle (1)
37 31-15-0595 Brush Cover (2)
39 31-44-2165 Handle Half - Right (1)
40 31-44-2170 Handle Half - Left (1)
41 31-50-1780 Motor Housing with Trace (1)
54 34-80-2021 Beveled Internal Retaining Ring (1)
60 40-50-0265 Rotation Button Spring (1)
63 42-42-0490 Rotation Release Button (1)
78 22-84-0085 Fan (1)
80 44-76-0355 Cord Protector (1)
81 42-38-0280 Rocker Boot (1)
58-01-0695
1680-20
54-10-0250
407A
SUPER HAWG
®
REVISED BULLETIN
DATE
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
CATALOG NO.
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
STARTING
SERIAL NUMBER
Sept. 2003
SEE REVERSE
SIDE
Orient the pin (15) with the
rounded end facing up,
as shown.
Orient the retaining ring (53)
with the barbs facing up,
as shown.
Insert the straight end of the
spring (61) into the hole in the
bottom of the shift disk (64).
Orient the
retaining ring (54)
with the bevel away
from the bearing (5),
as shown.
Orient the bearing
retainer (67) with the
offset away from the
bearing (4), as shown.
Orient the retaining
ring (55) with the
bevel facing away
from the bearing (6),
as shown.
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
0
0
SERVICE DETAILS FOR
PARTS ON THE BACK PAGE