Service Parts List S/N G97A

REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
STARTING
SERIAL NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL

www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 2
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 --------------- Electronics Housing - Lower (1)
2 --------------- PCBA (1)
3 --------------- PCBA Retaining Plate (1)
4 --------------- Battery Connector Housing - Lower (1)
5 --------------- Battery Connector Housing - Upper (1)
6 --------------- Battery Connector (1)
7 --------------- Electronics Housing - Upper (1)
8 31-17-0021 Cord Clamp (1)
9 31-12-0027 Main Support Tube Lower Cap (1)
10 44-14-0240 Wire Leg Linkage (3)
11 --------------- Power Cord with Ferrite Bead (1)
12 44-04-0105 Support Leg (3)
13 42-78-0200 Main Support Column (1)
16 44-60-1655 Leg Support Pin (3)
17 43-62-0395 Switch Handle Support (less switch) (1)
20 45-60-0045 Large Tube Base Support (1)
23 45-76-0115 Large Tube (1)
30 42-40-0005 Small Tube Slide Bushing (1)
31 45-76-0125 Small Tube (1)
36 42-52-0007 LED Mounting Cap Support with Nut (1)
41 06-82-0069 M3.0 x 30 Pan Hd. ST T-10 Screw (3)
44 45-56-0110 Sliding Handle Guide Strap (2)
46 12-20-2130 Service Nameplate (1)
48 42-36-0027 M18™ Leg Support Bracket (1)
50 06-82-0019 3.5 x 14 Pan Hd. ST T-15 Screw (28)
51 06-82-0059 M4.0 x 27.5 Pan Hd. T-20 Machine Screw (4)
52 06-82-0039 M3.5 x 12 Pan Hd. ST T-15 Screw (12)
53 06-82-0049 3.0 x 12 Pan Hd. ST T-10 Screw (4)
54 44-40-0485 M4 Nut (4)
56 45-88-0202 Washer (3)
57 06-75-0006 M6 Hex Socket Machine Screw (1)
58 06-82-0029 3.5 x 20 Pan Hd. ST T-15 Screw (12)
80 44-06-0102 Lens Cover Assembly (1)
80b --------------- LED Lens Cover (1)
80c --------------- LED Lens (1)
81 23-26-0200 LED Light Assembly w/ Power Cord and Grommet (1)
81a --------------- LED Light Assembly (1)
82 42-52-0505 LED Mounting Cap w/ Washers and Screws (1)
82a --------------- PH2 Round Head Washer Screw (2)
82b --------------- Spring Washer (2)
82c --------------- Washer (2)
82d --------------- Mounting Cap (1)
83 31-55-0075 LED Shroud Assembly (1)
83a --------------- Shroud Support - Right (1)
83b --------------- Shroud Support - Left (1)
83c --------------- LED Shroud (1)
83d 10-20-1018 Warning Label - Left (1)
83e 10-20-1019 Warning Label - Right (1)
84 --------------- Small Tube Clamp Assembly (1)
84a --------------- Clamp Lever (2)
85 --------------- Large Tube Clamp Assembly (1)
85f --------------- Gasket (1)
86 43-76-0010 Battery Connector Housing Kit (1)
87 43-76-0015 Electronics Housing Kit (1)
88 31-44-0347 Sliding Handle Assembly (1)
89 23-66-0063 Switch Box Assembly (1)
90 14-20-2130 Electronics Assembly with Ferrite Bead (1)
91 34-40-0355 O-Ring (1)
92 34-40-0357 O-Ring (1)
54-06-2130
M18™ ROCKET™ LED TOWER LIGHT
2130-20
G96A
May 2016
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
92
50(6x)
80b
80c
81a
57
82a(2x)
82b(2x)
83e
83c
83a
56
(2x)
82c
(2x)
52
(6x)
11
83d
83b
52(4x)
13
12(3x)
16(3x)
11 80
81a
81
83a 83b 83c
83d 83e
83
48
44(2x)
51(4x)
54
(4x)
9
58
(6x)
10(3x)
7
88
8
52(2x)
2
53(4x)
4
46
3
50(2x)
5
6
50(4x)
1
50
(10x)
1
7
87
2
6
90
4
5
86
41(3x)
36
31
91
30
85f
23
20
89
58(6x)
17
84a
84
84a
85f
85
11 50
80b 80c
80
82a 82b
82c 82d
82
82d
84a
(2x)
50(6x)
If any component of the
clamping system needs
replacement (84, 84a,
85 or 85f), Upper and
Lower Clamp Service Kit,
No. 14-46-2130 must be
ordered.
Adjustment
Screws
Adjustments may be
needed to Clamping
Assemblies 84 and 85
to prohibit sliding when latched.
Tighten or loosen adjustment screw
and flip clamp lever to the feel. If
clamping the lever seems too
difficult do not force lever.
Screw should be loosened
slightly and try securing the
lever again. If lever seems too
loose, tighten screw slightly and flip clamp lever to the feel.