Replacement Part List

REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
STARTING
SERIAL NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 1
54-06-2230
M12™ ROCKET™ LED TOWER LIGHT
2132-20
J93A
Apr. 2018
0
00
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 31-21-0240 Lens Kit (1)
2 --------------- ST Screw M3 x 11 (4)
3 --------------- Lens (1)
4 14-46-0490 Trigger Kit (Set of 2) (1)
5 --------------- ST Screw M3 x 11 (4)
6 --------------- ST Screw M2.3 x 5 (2)
7 --------------- Trigger Spring Plate (2)
8 --------------- Trigger (2)
9 --------------- Trigger Pin (2)
10 44-04-0190 Leg Kit (Set of 1) (3)
11 --------------- Leg (3)
12 --------------- Leg Pin (3)
13 14-20-2132 PCBA Assembly w/ Terminal Block (1)
14 22-64-2132 Power Adapter Kit (1)
15 --------------- Power Adapter Strap (1)
16 --------------- Power Adapter (1)
17 31-06-2131 Right Battery Interface (1)
18 31-06-2130 Bottom Base (1)
19 06-82-2130 ST Screw M4 x 12 (6)
20 31-06-2132 Left Battery Interface (1)
21 06-82-2135 ST Screw M3 x 8 (2)
22 12-20-2133 Service Nameplate (Not Shown) (1)
23 10-20-2092 Warning Label (Not Shown) (1)
1
2
3
2
3
4
5 6 7
8 9
5
6
7
8
9
10
11
12
11
12
13
14
15
16
15
16
17
18
19
20
21
4x
2x
2x
2x
2x
1x
1x
FIG. NOTES
22, 23 A clean, dry surface is essential for proper performance for
any adhesive system. The area intended for application of
any adhesive label or nameplate must be prepared by
cleaning with isopropyl alcohol. The solvent is to be applied
with a clean, lint free applicator and the surface allowed to
dry before applying the label or nameplate.