Service Parts List S/N C23B

ManualsBrandsMilwaukee ManualsTools & HardwareM12 12-Volt Lithium-Ion Cordless 3/8 in. Right Angle Drill (Tool-Only)

Motor Mount Plate

is a component of #11 (Motor Assembly)

and also #9 (Gearcase Assembly)

Red and Black

Wires are components

of #11 (Motor Assembly)

and also #12 (Switch Assembly)

See detail

MILWAUKEE ELECTRIC TOOL CORPORATION

13135 W. Lisbon Road, Brookﬁ eld, WI 53005

Drwg. 3

BULLETIN NO.

54-06-2416

SERVICE PARTS LIST

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 06-82-1080 M30 x 14 ST Housing Screw (7)

2 12-20-2415 Service Nameplate Kit (1)

3 31-52-0275 Forward / Reverse Lever (1)

4 31-92-0540 Paddle Trigger (1)

5 42-66-0850 3/8” Chuck (1)

6 05-88-1680 M5 LH Chuck Screw (1)

7 23-28-0275 LED Assembly (1)

8 42-70-0055 Housing Connection Clip (1)

9 14-29-0450 Gearcase Assembly (1)

10 31-44-2390 Housing Half Assembly (1)

11 14-50-0850 Motor Assembly (1)

12 23-66-2985 Switch Assembly (1)

13 42-55-2415 Contractor’s Bag (Optional) (1)

CATALOG NO. 2415-20

REVISED BULLETIN

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

M12™ 3/8” RAD DRILL

STARTING

SERIAL NO.

DATE

Feb. 2014

WIRING INSTRUCTION

C23B

EXAMPLE:

Component Parts (Small #) Are Included

When Ordering The Assembly (Large #).

SEE PAGE 3

54-06-2415

FIG. NOTES:

9,11 Service replacement gearcase assembly (9) comes with a

motor mount plate that must be removed and discarded when

servicing. A motor mount plate already exists on the motor

assembly (11).

6 Apply a drop of Type 242 Blue Loctite

to the threads of the

motor mount screws and the chuck screw (6).



= Part number change from

previous service parts list.

42-70-0058

Improved

Design

Original

Design

42-70-0055

M12™ tools utilize two different Housing

Connection Clip designs depending on the

Handle Set . See page two for details.

Summary of content (3 pages)

PAGE 1
BULLETIN NO. SERVICE PARTS LIST 54-06-2416 REVISED BULLETIN 54-06-2415 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M12™ 3/8” RAD DRILL CATALOG NO. 00 2415-20 EXAMPLE: 0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #). STARTING SERIAL NO. DATE Feb. 2014 WIRING INSTRUCTION C23B SEE PAGE 3 1 2 10 13 1 8 * See detail 12 = Part number change from previous service parts list.
PAGE 2
Early M12™ Handle Sets utilize Housing Connection Clip No. 42-70-0055. Install this clip design by aligning the side rails of the clip with the two slots in the handle set. Gently push into place with the aid of a small flat blade screwdriver or a similar instrument. Be sure that the clip is properly seated in both slots and that the clip is flush to sub-flush to the end of the handle set.
PAGE 3
= WIRE TRAPS or GUIDES 7 12 10 11 9 3 13 6 8 4 5 7 1 9 Be sure to route wires in such a way as to not interfer with the operation of the speed dial on the PCB assembly, switch and forward/reverse lever. 10 11 8 12 4 5 2 SWITCH DETAIL Left Side Right Side TERMINAL BLOCK ASSY. PCB ASSEMBLY 3 13 9 6 8 7 4 11 12 10 1 LEFT HANDLE HALF 2 5 MOTOR ASSEMBLY LED ASSEMBLY SWITCH NOTE: SWITCH ASSEMBLY (23-66-2980) CONSISTS OF: SWITCH, PC BOARD AND TERMINAL BLOCK ASSY.