Replacement Parts List

45
84
45
67
66
65
64
63
62
61
70
71
72
73
74
75
31
(2x)
38
(5x)
28
39
(2x)
23
25
48
51
57
54
50
55
53
46
41
42
43
86
49
47
(2x)
52(2x)
40
44
22
14
19(2x)
92
45 61 62 63 64 65 66 67
70 71 72 73 74 75 84
87
15
47
NOTE:
Position ‘U’ Slot #50
as shown with the upper
notch facing the motor
15
85
14 19
23
26
NOTE:
Be sure that washer #67
is placed in gearcase
support assembly #87
as shown.
43
41
42
4087
Lever #43 fits
through slots
in gearcase
support #87
and release
slide #40
#23 Wire Form to catch
spring
hooks
Spring grooves
in Ratchet
#19 Ratchet
Return
Springs
#14 Ratchet
Spring Holder
85
14 19
23
Ratchet Assy.
#23
#19
Ratchet Assy. #85 consists of ratchet and left drive
link pressed onto drive shaft. A ratchet stop pin is
pressed into ratchet. Wire Form #23 is inserted into
small hole in spring grooves of ratchet. Bend straight
end over. Return Springs #19 are inserted into the
Spring Holder #14, fed through spring grooves of
ratchet and hooked onto Wire Form #23.
Screw locations and tightening sequence
38 (5x)
31 (2x)
1
2
3
4
5
6
7
Inside cavity of
Gearcase Cover
Assembly (28)
T-Plate and
Drive Pin are
pressed in place
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
14 43-72-0780 Ratchet Spring Holder (1)
15 --------------- Bushing (1)
19 40-50-1005 Ratchet Return Spring (2)
22 44-55-0300 Follower Pawl (1)
23 44-60-1325 Wire Form (1)
25 40-50-3960 Torsion Spring (1)
26 42-40-1205 Bushing (1)
28 28-20-2473 Gearcase Cover Assy. with T-Plate & Drive Pin (1)
31 06-82-5320 8-32 x 5/8" Pan Hd. Slt. Tapt. T-20 Scr (2)
38 06-82-5411 10-24 x 5/8" Pan Hd. Taptite T-25 Screw (5)
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
39 06-81-0485 M2 Pan Hd. Phillips Screw- Motor Mounting (2)
40 45-24-1040 Release Slide (1)
41 40-50-3270 Torsion Spring- Release Lever (1)
42 44-60-0560 Pin- Release Lever (1)
43 44-10-0870 Release Lever (1)
44 40-50-4905 Return Spring- Follower Pawl (1)
45 02-50-0175 Needle Bearing (2)
46 44-81-0260 Roller Pin Rail (1)
47 42-34-5380 Rubber Slug (2)
48 40-50-3220 Drive Link Return Spring (1)
49 44-60-2200 Mounting Shaft- Return Spring (1)
50 28-10-0900 U Slot (1)
51 44-60-2210 Pin- Drive Link Return Spring (1)
52 44-40-0115 M2 Hex Nut (2)
53 43-72-0800 Carrier (1)
54 44-96-0425 Cam Roller (1)
55 44-66-2300 Roller Pin (1)
57 44-66-2310 Roller Carrier Pin (1)
61 --------------- 3rd Stage Ring Gear (1)
62 --------------- 3rd Stage Planet Gear (5)
63 --------------- 4th Stage Sun Gear (1)
64 --------------- 4th Stage Ring Gear (1)
65 --------------- 4th Stage Planet Gear (5)
66 --------------- 4th Stage Carrier (1)
67 --------------- Washer (1)
70 --------------- 3rd Stage Sun Gear (1)
71 --------------- 2nd Stage Planet Gear (3)
72 --------------- 1st and 2nd Stage Ring Gear (1)
73 --------------- 2nd Stage Sun Gear (1)
74 --------------- 1st Stage Planet Gear (3)
75 --------------- Motor Spacer Plate (1)
84 42-50-0600 Cam and Cam Shaft Assembly (1)
85 44-84-0381 Drive Shaft/Link/Ratchet Assembly (1)
86 44-55-0351 Drive Pawl/Link/Release Lever Assembly (1)
87 28-14-0496 Gearcase Support Assembly (1)
92 14-29-0800 Gear/Cam Assembly (1)
= Part number change
from previous service
parts list.




