Replacement Parts List

M12 FUEL™ Die Grinder
2485-20
K92A
54-22-2100
June 2019
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 48-68-0031 Collet Nut 1
2 48-66-0974 1/4" Collet 1
5 --------------- Damper for Support 1
13 23-28-0340 Light Pipe 1
14 44-60-0575 Rivet Pin for Housing 1
15 44-94-0050 Rod 1
16 --------------- Housing Support Head 1
17 --------------- Housing Support Grip 1
18 06-82-3002 Housing Screw 11
19 --------------- Damper for Cover 1
20 --------------- Housing Cover Grip 1
21 --------------- Housing Cover Head 1
30 12-20-2430 Service Nameplate 1
31 10-20-0625 Warning Label 1
32 42-77-0405 1/8" Collet (Optional) Not Shown 1
33 49-96-4040 Open End Wrench (1/2") 1
34 49-96-4090 Open End Wrench (11/16") 1
35 42-55-2425 Contactor Bag 1
40 14-34-0002 Housing Kit 1
41 14-20-0070 Electronics Assembly 1
42 16-01-2405 Rotor Assembly 1
43 44-10-0520 Paddle Trigger Assembly 1
44 14-46-0166 1/4" Collet and Nut Kit 1
REVISED BULLETIN
SERVICE PARTS LIST
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
STARTING
SERIAL NO.
2
17
42
5
15
21
41
14
13
43
31
35
16
1
30
20
19
18
(x11)
44
1
2
40
5 15 16 17 18
19 20 21 30 31
33
34
EXAMPLE:
Component Parts (Small #) Are Included
When Ordering The Assembly (Large #).
0
00
SCREW TORQUE SPECIFICATIONS
SEAT TORQUE
FIG. PART NO. WHERE USED (KG/CM) (IN/LBS)
18 06-82-3002 Housing Cover Head 7-9 6.0-7.8
18 06-82-3002 Housing Cover Grip 7-9 6.0-7.8
Install the electronics assembly, route wires through wire traps and
channels as shown. Be sure all components are seated squarely
and firmly in place. Be sure there is no interference when installing
the housing covers (20, 21).
Wire Traps or Channels
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. Lisbon Road, Brookeld, WI 53005
Drwg. 1
NOTE: Damper is pressed
in-between housing halves.