User Guide

3
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modied. Damaged or modied batteries may exhibit
unpredictable behavior resulting in re, explosion or
risk of injury.
• Do not expose a battery pack or tool to re or exces-
sive temperature. Exposure to re or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging im-
properly or at temperatures outside the specied range
may damage the battery and increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Do not modify or attempt to repair the appliance or
the battery pack (as applicable) except as indicated
in the instructions for use and care.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
DUST EXTRACTORS
•Before using the dust extractor, read this opera-
tor’s manual, your tool, battery pack and charger
operator’s manuals, and all labels on the dust
extractor, battery pack, charger and tool.
• Always use side handle assembly with the correct
neck diameter for the rotary hammer/hammer
drill. An ill-tting side handle will not tighten securely,
causing loss of control.
• Never use dust extractor without dust box and
HEPA lter in place. Never use water to clean dust
box or HEPA lter.
• Wear ear protectors. Exposure to noise can cause
hearing loss.
•
WARNING
To reduce the risk of
injury, when working
in dusty situations, wear appropriate respiratory
protection or use an OSHA compliant dust extrac-
tion solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Always use side handle provided with dust extrac-
tor when using with a rotary hammer/hammer
drill. When dust extractor is removed from the
tool, always use side handle(s) supplied with
the tool. Loss of control can cause personal injury.
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
READ AND
SAVE ALL
INSTRUCTIONS
FOR FUTURE USE
FOR HOUSEHOLD OR COMMERCIAL USE
SYMBOLOGY
Volts
Direct Current
C
US
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. ..................................................... 2509-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
Max Bit Diameter ........................................... 1-1/4"
Hammer Collar Sizes
Diameter ............................. Ø 1.6"-2.4" (41-61 mm)
Circumference .................... 5.1"-7.5" (129-192 mm)
Dust Box Cat. No ................................ 42-16-0580
Crevis Tool Cat. No ............................. 49-90-2325
Recommended Ambient
Operating Temperature ......................0°F to 125°F