Operator’s Manual

5
SPECIFICATIONS
Cat. No. ..................................................... 2522-20
Volts.............................................................. 12 DC
Battery Type .................................................M12™
Charger Type................................................M12™
RPM ..............................................................20,000
Wheel Size .......................................................... 3"
Arbor Size ............................................3/8" or 7/16"
Maximum Wheel Thickness .............................. 1/8"
Maximum Cutting Depth ................................. 0.64"
Recommended Ambient
Operating Temperature ......................0°F to 125°F
FUNCTIONAL DESCRIPTION
1
3
2
5
4
6
1. Guard
2. Spindle lock (behind guard)
3. Control switch indicator
4. Control switch
5. Handle
6. Trigger
7. Dust extraction attachment
8. Dust shoe assembly
9. Shoe release button
10. Depth of cut gauge
11. Depth of cut wing nut
12. Top ange
13
14
15
12
8
10
11
7
9
13. 3/8" bottom
ange
14. 7/16" bottom
ange
15. Centering hub
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove battery pack before
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Wheel Selection
WARNING
To reduce the risk of injury, only
use Type "1" abrasive and diamond
wheels with a maximum 1/8" thickness, rated with
a maximum safe operating speed at least
20,000 RPM. Type 1 wheels are for side grinding
only, not surface grinding. Read all safety infor-
mation supplied with cut-o󰀨 wheels.
Always wear proper safety equipment, including a
dust mask. Protect everyone in the area from sparks.
Use the chart below to choose the correct wheel.
Di󰀨erent types of wheels work best for di󰀨erent
materials. Follow the use recommendations from
the wheel manufacturer.
Wheel Type: Recommended for Cutting:
Carbide Abrasive
Wheel
Drywall, Fiber Cement,
Plastic
Abrasive Cut-o󰀨
wheel
Steel, Stainless Steel,
Non-Ferrous Materials
Diamond Abrasive
Wheel
Tile, Ceramics
WARNING
To reduce the risk of injury, use
only the proper wheel made for this
tool. Do NOT use any type of saw blade. Use only
abrasive and diamond wheels. To ensure the
wheel is properly secured, always use the mount-
ing hardware supplied with your tool.
Do not touch the cut-o󰀨 wheel or workpiece
immediately after cutting; they may be hot and
could burn skin.
Installing and Removing Cut-O󰀨 Wheels
Before operating the tool, make sure the wheel is in
good condition (see “Specic Safety Rules”).
3/8"
Bottom
ange
Cutting
wheel
Top
ange
Bolt
Spindle
Spindle
lock
Guard
7/16"
Bottom
ange
Centering
hub
1. To install cut-o󰀨 wheels, remove the battery pack.
2. Place tool on a rm surface with the guard surface
facing up.