Replacement Parts List

Place electronics assembly into housing support.
Install LED lens as shown.
Install yoke assembly onto
housing support/electronics assembly.
Place the HV wire
into wite trap.
Assemble control board into housing slot.
Assemble on-off switch
into housing cavity.
Place battery
terminal block
into housing
cavity.
Push all wires down into housing
cavities as shown.
Install the switch lock-out slideBe sure that all
components are
firmly and squarely
in place.
PRIOR TO INSTALLING THE HOUSING COVER
ONTO THE HOUSING SUPPORT, BE SURE THAT
THERE ARE NO INTERFERENCES.
1 2
3 4
5 6
7
8
9