Service Parts List S/N C60A

7 14

FIG. NOTES:

6 Apply a drop of Type 242 Blue Loctite

to the threads of the

chuck screw (6) before securing chuck (5) to the spindle .

MILWAUKEE ELECTRIC TOOL CORPORATION

13135 W. Lisbon Road, Brookﬁ eld, WI 53005

Drwg. 2

BULLETIN NO.

54-06-2615

SERVICE PARTS LIST

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 06-82-1080 M3 x 14 ST Housing Screw (7)

2 12-20-2615 Service Nameplate Kit (1)

3 31-52-0300 Forward / Reverse Lever (1)

4 31-92-0350 Paddle Trigger (1)

5 42-66-0855 3/8” Chuck (1)

6 05-88-1500 M6 LH Chuck Screw (1)

7 --------------- LED Assembly (1)

8 31-92-0355 Trigger Lever (1)

9 14-29-0525 Gearcase Assembly (1)

10 31-44-1010 Housing Half Assembly (1)

11 14-50-1000 Motor Assembly (1)

12 23-66-2835 Switch Assembly (1)

13 40-50-1090 Compression Spring (1)

14 --------------- Red Leadwire (3”, 14 Gauge) (1)

15 42-55-2495 Blow Molded Carrying Case, (Optional) (1)

16 --------------- Black Leadwire (1-3/4”, 14 Gauge) (1)

CATALOG NO. 2615-20

REVISED BULLETIN

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

18 VOLT 3/8” RAD DRILL

STARTING

SERIAL NO.

DATE

Oct. 2010

WIRING INSTRUCTION

C60A

EXAMPLE:

Component Parts (Small #) Are Included

When Ordering The Assembly (Large #).

SEE REVERSE SIDE

PAGE 1
BULLETIN NO. SERVICE PARTS LIST 54-06-2615 SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 VOLT 3/8” RAD DRILL CATALOG NO. 00 EXAMPLE: 0 Component Parts (Small #) Are Included When Ordering The Assembly (Large #). 2615-20 STARTING SERIAL NO. C60A REVISED BULLETIN WIRING INSTRUCTION SEE REVERSE SIDE 10 13 15 DATE Oct. 2010 1 8 3 16 7 14 12 16 4 11 10 1 14 1 2 FIG. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 7 PART NO.
PAGE 2
3 RED GRN 9 7 BWN 11 10 8 ORANGE RED BLACK WHITE = WIRE TRAPS Be sure to route LED wires #15, #16, #17 and #18 through the wire trap along the top of the left handle halve, as shown above. Secure those wires by pressing them firmly down into the traps so there is no pinching or interference when reassembling the tool.